Yes, it is very disappointing not to receive any feedback.
I did solve the issue, and it was something completely unexpected. At one point, I used another device, and the web GUI loaded, indicating a problem on my main computer. After some more troubleshooting, I found that my network...
Wow, I would have expected some feedback by now, am I missing something?
My whole cluster and all of the VM's are down. I still can ssh into all nodes, but the web GUI will not load.
Looks like I will have to reset all nodes, re-install PROXMOX and restore my VM's, not a lot of fun :-(
root@pve-hn2:~# wget --no-check-certificate https://localhost:8006
--2021-10-21 13:50:21-- https://localhost:8006/
Resolving localhost (localhost)... 127.0.0.1
Connecting to localhost (localhost)|127.0.0.1|:8006... connected.
The certificate's owner does not match hostname ‘localhost’
HTTP...
root@pve-hn2:~# pvecm status
Cluster information
-------------------
Name: PVE-Cluster
Config Version: 4
Transport: knet
Secure auth: on
Quorum information
------------------
Date: Thu Oct 21 13:48:03 2021
Quorum provider: corosync_votequorum
Nodes...
Last login: Thu Oct 21 06:32:41 2021 from 10.0.1.154
root@pve-hn2:~# pvecm status
Cluster information
-------------------
Name: PVE-Cluster
Config Version: 4
Transport: knet
Secure auth: on
Quorum information
------------------
Date: Thu Oct 21 13:48:03...
I have been running my cluster on the remaining 3 nodes until a few days ago, and now the web GUI does not load on any of them. I can ping all three and ssh into them. I did perform some new updates and rebooted but no web GUI loads? I did spend some time reading and performing a multitude of...
root@pve-hn2:~# wget --no-check-certificate https://localhost:8006
--2021-10-08 15:00:58-- https://localhost:8006/
Resolving localhost (localhost)... 127.0.0.1
Connecting to localhost (localhost)|127.0.0.1|:8006... connected.
The certificate's owner does not match hostname ‘localhost’
HTTP...
root@pve-hn1:~# pvecm status
Cluster information
-------------------
Name: PVE-Cluster
Config Version: 4
Transport: knet
Secure auth: on
Cannot initialize CMAP service
A couple of days ago, my 4 node cluster would not load the web GUI, for any node. I have ssh access to all 4 nodes and rebooted them many times.
I read through the forum and followed some advice given to others with a similar issues, but things are just getting worse now.
Node pve-hn4 is the...
Ok, not sure how this second link got in there, my cluster has been working fine for a long time. I manually edit the corosync.conf by removing the references to it on all nodes. I had to manually restart the corosync but after that, I was able to join the cluster. Except that the new node shows...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.