Recent content by jgracio

Apologizes by insisting? Any views how to connect an external usb drive when Proxmox do not detect it automatically? Thanks

When connect external usb disks to proxmox some are listed with lsblk (even some pendrives) and others do not. Disks not listed are able to be passedthrough and accessible by VMs. Any idea how to connect the the usb disks? Disconnecting and connetcting the disk back to the usb port I get the...

Thanks for your prompt reply. The problem is my NUC has a wifi network card but it is not seen from Proxmox. To lspci command I get: 01:00.0 Network controller: Intel Corporation Wireless 7265 (rev 59) But no active wifi network card is listed when I run the command ip a : 3: wlp1s0...

Dear @Maerlin Sorry for my basic question You wrote "ive your wlan (wlp1s0 in my case) the ..." how can I know my wlan reference? Thanks

Thanks @mira The output is: root@proxmox:~# ethtool -i eno1 driver: e1000e version: 3.4.1.1-NAPI firmware-version: 0.13-4 expansion-rom-version: bus-info: 0000:00:1f.6 supports-statistics: yes supports-test: yes supports-eeprom-access: yes supports-register-dump: yes supports-priv-flags: no...

In my case, so far I'm not linking the network "failure" with any other event or fact. The NIC Just stops working with indication led blinking, being necessary to restart it. I don't know if it is a configuration problem or a hardware problem. If I buy a new NUC and reinstall the same software...

Yes, @mira , I'm using the last version of PVE 5. I was planning to upgrade to version 6 but think is first better to fix the network problem. Meanwhile, the network interface continues to stop randomly(apparently).

HELP please It has failed again and I have no clue how to identify the problem

Hello I'm using Linux proxmox 4.15.18-21-pve #1 SMP PVE 4.15.18-48 on an Intel NUC for more than 2 years without problems. For the last two months the NUC network card, after being working apparently smoothly, stops working not responding from any virtual network card. After restarting the OS...

Problem solved as I was able to remove a previous snapshot and with the space release vm was able to restart. Thanks

Hello I proxmox running for a couple of months with HassOS (just home assistant nothing more) and now hassos VM stopped because seems local-lvm is full. As I did install proxmox from a tutorial I have no idea how can I fix the problem now. Any help would be great :) Thanks