Recent content by HProx

I'll keep the e1000 because of 10Gb network. The last time I tried Virtio, it does not manage this speed.

Nothing in the syslog at the error time in OpenMediavault. There's nothing in the PVE console. The host CPU is a AMD Ryzen 9 3900X Full properties: agent: 1 balloon: 4096 bios: ovmf boot: order=scsi0;ide2;net0 cores: 4 cpu: host,flags=+ibpb;+virt-ssbd;+amd-ssbd;+amd-no-ssb;+aes efidisk0...

Hi! I'm not sure this forum is the right place to post, but I don't find any fitting one. I have Proxmox 7.2.4, OpenMediavault 6.0.27-1 under Linux kernel linux-image-5.16.0-0.bpo.4-amd64. All updates are done at the time of this post. I get a strange problem, seemingly linked to the kernel...

Thank you for the reply! For 3 VMs, there is so much? I have to look at proxmox documentation :) I'm pretty new at hosting VMs. The host itself works flawlessly at 10GBs. I'll try e1000. As it's a 1Gbs NIC, I was thinking it would be limited at 1Gbs. [EDIT]: Wonderfull!!! It works! :)

Hello, I've Proxmox 6.3-3 installed on a host with a 10Gb/s NIC. 3 VMs are defined: one with OpenMediaVault, 2 others with simple Ubuntu Server. the 3 VMs are limited to a 1Gb/s speed for network, and I don't know why. The virtual NIC is a VirtIO on a bridge vmbr0. On host, I have: # ip link...

I prefer to use the proxmox image to have the cleaner installation, with the least unnecessary elements in the system.

Using an AMD video card resolves the problem. It's sad that GUI/X is mandatory for a system which do not use nor need it once the installation is done. Next step, remove the video card and see if it works...

Thank you. I'm waiting for an AMD video card to try. I was hoping for another solution as PCI express 16x slots will be used for raid cards. If install work with AMD card, I'll swap it after with the PCIe1X one. I'm already using Proxmox for 2 gaming VMs with two Nvidia video cards passthrough...

Hello, I'm trying to install Proxmox 6.2.1 onto and Asrock X570 Creator + 3900X, NVidia 710GT (PCIe 1x), Samsung NVMe 970 Plus 1To. The install process always fail after obtaining the IP for the 10Gb Ethernet: the screen goes black. I've tried on debug mode: I've a Xorg log showing an error as...