Recent content by geormanth

  1. G

    New Setup 4 nodes

    I want to be completely independent from hardware, not use any scsi cards for disks just normal sata disks, not care if ssd for proxmox and VMs fails just clone and make a new one, not care if I loose one node or two nodes. We have from proxmox backup solution for VM's and with clonezilla or...
  2. G

    New Setup 4 nodes

    So what do you thing each node has 2 hdd and one ssd for os and vm's. I don't want the file servers to be on their own device but lxc and manage hdd's from all nodes. About your last sentence "these can be big spinning rust and you can use parity raid- and they can double as backup space for...
  3. G

    New Setup 4 nodes

    Until now I didnt loose anything at all, cause I had all my data in two mirror servers with hardware raid1 disks and external nas as third backup all of them replicate with rsync. I want to expand my cluster from 2 machines to 4 cause my needs increasing for cpu and storage. So for now I have 2...
  4. G

    New Setup 4 nodes

    So, please be advice which will be a good solution to manage all the disks, replications etc? I don't have needs for ha, I prefer load balancing instead with external san for extra backup. The problem is the disks has total 18T capacity plus 1T ssd and the external storage is only 5T (4X2T-Raid5).
  5. G

    New Setup 4 nodes

    The l machine has 12 bays for sata disks 3 to each node, I don't know yet if it has separate slot to put OS ssd inside. I already have the sata disks. I don't have the ssd's. My needs are: 5-10 users 4-5x LXC 3x Linux KVM 4x Windows KVM About raid10 scenario you mention, I think ceph and raid...
  6. G

    New Setup 4 nodes

    Hi, I am prepare to setup a 4 nodes dell poweredge 6100. My plan is to make a 4x proxmox cluster including ceph storage cluster. Setup per node: 2 X quadcore xeon 32GB RAM 2X gb lan 2X 2terra HDD (one node has 2X3T) 1X 240GB SSD My questions are: 1. Can I use the same ssd for proxmox and...
  7. G

    [SOLVED] How to configure the network correct

    With this way every iptables rules are permanent. If you add your rules in network interfaces then every time the network is up will be add the rules and every time is down remove the rules. So you have a better control. Of course this is my opinion and nothing more.
  8. G

    [SOLVED] How to configure the network correct

    Try this: auto lo iface lo inet loopback auto vmbr0 iface vmbr0 inet static address 188.68.49.XXX netmask 255.255.252.0 gateway 188.68.48.1 bridge_ports eth0 bridge_stp off bridge_fd 0 # default route to access subnet up route add -net...
  9. G

    NFS Shares World Readable

    Hi, I made some checks with Nessus for Vulnerabilities and the results shows "NFS Shares World Readable" The remote NFS server is exporting one or more shares without restricting access (based on hostname, IP, or IP range). Output The following shares have no access restrictions ...
  10. G

    Errors with pveproxy

    Hi, It works fine and the retransmitting stop. I would like to ask what type of fence device to use, I don't know what is behind the server to choose the correct one. As you mention in wiki we have APC, Intel, Dell, IPMI . Thanks again for useful help George
  11. G

    Errors with pveproxy

    Two nodes are connected with dsl and one with high speed, maybe that's why is too slow. I read here: http://www.hastexo.com/resources/hints-and-kinks/whats-totem-retransmit-list-all-about-corosync to reduce window_size to 50 in corosync.conf, but I cant find where is corosync.conf. What is your...
  12. G

    Errors with pveproxy

    Before create cluster I was checked multicast and is working fine. Here are the results from omping 10.10.200.10 10.10.200.11 10.10.200.12 10.10.200.11 : multicast, seq=5, size=69 bytes, dist=0, time=142.178ms 10.10.200.12 : unicast, seq=1, size=69 bytes, dist=0, time=129.531ms 10.10.200.12 ...
  13. G

    Errors with pveproxy

    Thanks for your quick response. After the installation it seems that working fine. But I see a lot corosync TOTEM logs Here are some of them Sep 10 15:02:08 gam01 corosync[3426]: [TOTEM ] Retransmit List: 6b8 6b9 6bd 6bf Sep 10 15:02:08 gam01 corosync[3426]: [TOTEM ] Retransmit List: 6b8...
  14. G

    Errors with pveproxy

    Any more help how to reinstall them?
  15. G

    Errors with pveproxy

    I already did that with Firefox, Safari, Chrome

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!