Recent content by ale.ab

i follow this step zpool status -v rpool ... state: DEGRADED …. get out disk fail and get in new disk if not new wipe disk on proxmox gui proxmox-boot-tool status # for example sda disk in use and sdb new disk sgdisk /dev/sda -R /dev/sdb sgdisk -G /dev/sdb proxmox-boot-tool format...

thank you for reply. i know about that page. but i can't import raw image because i can't access to hypervisor... i can access only on my VM (kvm) so i think use guide to P2V (from bare metal to proxmox) but the guide seems is only for windows... or i change a question... how i can migrate...

Hello, i have a VM on hetzner cloud (KVM) and i need to migrate in my proxmox server. VM running linux almalinux. which is best pratice? i think can i use dd to create an image from hetzner VM to a my sftp storage (or other) then i can restore with boot sytemrescue on my proxmox and write...

sorry, now i replace correct my drive. big thank you to point me in right direction. yes, i know about speed of SSD an HDD , but is only to test . now if it happens in production i know what to do thank you again

there is a howto for replace hdd failed? now is happen on my lab , but when happen in production is a normal behaviour? or am i doing something wrong? thank you in advance

Hello, i'm try to replace an hdd failed. i have simple proxmox VE with 2 SSD disk 512GB 1 is dead. i try to replace with 1 hdd SATA 750gb, because is on my lab is not a problem. i detach ssd broken, attach hdd and on ssh: zpool replace rpool 9569750636164580599 /dev/sdb now with zpool...

sorry for ask again, but i'm not comfortable with install pve ontop of debian... if i move some VM can i use this server with 32GB RAM with ZFS? i try to search better with ZFS and found "Limit ZFS Memory Usage" https://forum.proxmox.com/threads/ram-full.76067/...

ok thank you for reply. ok , so for this server ZFS is not good choiche i understand... now i'm focusing on xfs (is better than ext4?) and is better setup with proxmox iso so i create LVM? i don't know why my isp default setup is without LVM.... thank you in advance

ok, so if i understand correctly if i would use ZFS i "reserve" 16GB for ARC and i can "use" 14GB for VM... correct? otherwise if i want use 26GB for my VM i have only one choice , i must use ext4 or xfs correct? thank you

Hello, i have a proxmox server from few years with this configuration 1 cpu 4core/8threats 32gb ram 2x2tb raid1 software with proxmox 6 (isp provided with ext4 without LVM) now i bought a new server with this hardware 1 cpu 8core/16threats 32gb ram 4x2tb raid software but now i have ipmi so i...

Any news???? :) Thank you

here you are :) root@server1:~# zfs list -t all NAME USED AVAIL REFER MOUNTPOINT rpool 25.8G 23.1G 96K /rpool rpool/ROOT 984M 23.1G 96K...

tank you for you help, but semms not my destiny... :( root@server1:~# pve-zsync sync --source 401 --dest 192.168.0.2:rpool --verbose --maxsnap 2 root@192.168.0.2's password: WARN: COMMAND: ssh root@192.168.0.2 -- zfs list -rt snapshot -Ho name...

ok, in my case how i could backup VMID 401 on server2, also only vm's disk... pve-zsync sync --source 401 --dest 192.168.0.2:/var/lib/pve-zsync --verbose --maxsnap 2 or other command? thank you

ok, thank you for help me :) this is only for testing, then i go in production. so... i have 2 server (minimal) with one disk sata and 1 network card. during proxmox installation i choose: file system ZFS (raid-0) because i have only one disk. for both server ip server 1: 192.168.0.1 ip server...