M
melinameline
Guest
Hello,
I know Proxmox has nothing to do with this forum, but I'm so lost: (I can not move, I want a grip. (do me a favor: pray
first, I would give you a picture of the situation:
I have a local network connected to the Internet cisco 2600 router connected with a specialized line (public address).
I have 3 servers:
-one DNS server containing a firewall with iptables,
- one web server,
- and one mail server.
each one have two network interfaces, one public address and one local address (local network 192.168.xx).
So, back to my problem, my problem is as follows:
I have a server (powerful enough) with the following characteristics:
-12 GB of RAM,
-2 Intel,
-2 Hard drives, each one with 146GB,
-2 Embedded NICs.
I want put on, three servers: one mail server and 2 web servers.
For this, I must virtualize, so I installed proxmox from the cd installation cd,
-Type: container (OpenVZ)
-Model: debian-6.0 i386 standard,
Memory-RAM: 4GB
-Swap: 1.5 GB
Hard disk: 80GB
For the Network (the adjustment of network interfaces for the VM)
I chose the type Virtual Network (venet), in fact, I do not know what is the difference between venet Ehternet and bridged (VETH).
I have assigned it Venet local machine IP address ie 10.0.0.2
and I clicked on create.
the virtual machine with the VMID 101 is indeed created,
I now turn to my mail server installation,
when I clicked on the button opn vnc console it displays a message: could not connect to server:
@ Server: 5900, for both private and public addresses.
I went on the firewall, I have accepted the 5900 port for both interfaces (public and private (192.168.xx))
restarting everything, I got the following case:
, By accessing the Web console with the local address (192.168) works well,
-But accessing it with the public address that does not work! I always show
Could not connect to server: public @ server: 5900
but questions are:
how to make this MV accecible from his public address.
once installed my mail server over the VM, how to declare it in the zone file of my dns to make it accessible with its domain name.
Thank you
I know Proxmox has nothing to do with this forum, but I'm so lost: (I can not move, I want a grip. (do me a favor: pray
first, I would give you a picture of the situation:
I have a local network connected to the Internet cisco 2600 router connected with a specialized line (public address).
I have 3 servers:
-one DNS server containing a firewall with iptables,
- one web server,
- and one mail server.
each one have two network interfaces, one public address and one local address (local network 192.168.xx).
So, back to my problem, my problem is as follows:
I have a server (powerful enough) with the following characteristics:
-12 GB of RAM,
-2 Intel,
-2 Hard drives, each one with 146GB,
-2 Embedded NICs.
I want put on, three servers: one mail server and 2 web servers.
For this, I must virtualize, so I installed proxmox from the cd installation cd,
-Type: container (OpenVZ)
-Model: debian-6.0 i386 standard,
Memory-RAM: 4GB
-Swap: 1.5 GB
Hard disk: 80GB
For the Network (the adjustment of network interfaces for the VM)
I chose the type Virtual Network (venet), in fact, I do not know what is the difference between venet Ehternet and bridged (VETH).
I have assigned it Venet local machine IP address ie 10.0.0.2
and I clicked on create.
the virtual machine with the VMID 101 is indeed created,
I now turn to my mail server installation,
when I clicked on the button opn vnc console it displays a message: could not connect to server:
@ Server: 5900, for both private and public addresses.
I went on the firewall, I have accepted the 5900 port for both interfaces (public and private (192.168.xx))
restarting everything, I got the following case:
, By accessing the Web console with the local address (192.168) works well,
-But accessing it with the public address that does not work! I always show
Could not connect to server: public @ server: 5900
but questions are:
how to make this MV accecible from his public address.
once installed my mail server over the VM, how to declare it in the zone file of my dns to make it accessible with its domain name.
Thank you