hello,
i have a problem setting up a working vmbr on my root.
Its a Hetzner EQ6 and I found some threads, but all solutions are not working on my system so I hope anyone here as a good idea.
Heres my setup:
and the network configuration (ip's changed). eth0 and vmbr0 are working fine. I need to set up an additional (private) network. The VM's must be able to access the internet
178.55.34.78 is the 2nd public IP. I know the netmask of vmbr0 is not right, but its only working with this configuration.
Now i need to create vmbr1 for the internal routing, but im not sure about the right config. Hetzner allows only one MAC address to access the internet, i have no more public IP's.
Maybe somebody of you has an idea working with this szenario.
Thanks!
i have a problem setting up a working vmbr on my root.
Its a Hetzner EQ6 and I found some threads, but all solutions are not working on my system so I hope anyone here as a good idea.
Heres my setup:
Code:
#pveversion -v
pve-manager: 1.7-11 (pve-manager/1.7/5470)
running kernel: 2.6.35-1-pve
proxmox-ve-2.6.35: 1.7-9
pve-kernel-2.6.35-1-pve: 2.6.35-9
qemu-server: 1.1-28
pve-firmware: 1.0-10
libpve-storage-perl: 1.0-16
vncterm: 0.9-2
vzctl: 3.0.24-1pve4
vzdump: 1.2-10
vzprocps: 2.0.11-1dso2
vzquota: 3.0.11-1
pve-qemu-kvm: 0.13.0-3
ksm-control-daemon: 1.0-4
Code:
#sysctl -p
net.ipv4.conf.all.rp_filter = 1
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.ip_forward = 1
Code:
auto eth0
iface eth0 inet static
address 178.55.34.77 (main IP)
netmask 255.255.255.192
gateway 178.55.34.1
broadcast 178.55.34.82
pointopoint 178.55.34.1
auto vmbr0
iface vmbr0 inet static
address 178.55.34.77
netmask 255.255.255.255
broadcast 178.55.34.82
bridge_ports none
bridge_stp off
bridge_fd 0
up ip route add 178.55.34.78 dev vmbr0
Now i need to create vmbr1 for the internal routing, but im not sure about the right config. Hetzner allows only one MAC address to access the internet, i have no more public IP's.
Maybe somebody of you has an idea working with this szenario.
Thanks!