Multi-IP in one VM

[yugawara]

I did not find it may have been in this forum past.

I like to use Multi-IP on ONE VM (Container OpenVZ).
But only we can access oroginal IP of the VM.
I tried folloing on ssh proxmoxVE :
iptables -A INPUT -d (additional-ip) -j ACCEPT
But no effect.
Would you advice me how to Multi-IP in one VM ?

yugawara

 

[yugawara]

This is a self answer.

I found one solution.
Modifying vz conf file.
vi /etc/vz/conf/10?.conf

from like as ;
ORIGIN_SAMPLE="pve.auto"
IP_ADDRESS="192.168.1.132"
HOSTNAME="centos5.xxxxxx.net"

Adding multi-IPs ;
ORIGIN_SAMPLE="pve.auto"
IP_ADDRESS="192.168.1.132"
IP_ADDRESS="192.168.1.133"
IP_ADDRESS="192.168.1.134"
HOSTNAME="centos5.xxxxxx.net"

And restart the VM.

I do not know what it is allowed.
However, it is working correctly following my indications.
Please give me any advice.

Yugawara

 

[tom]

you can enter multiple IP via gui (venet), just enter them all in one line, separated with a space.

 

[yugawara]

Thank you. Now I can add multiple IP via venet.

I am a beginner for Proxmox, so I donated little.

 

[tom]

great, thanks.

 

[yugawara]

Sorry, it was not solved.

Adding multiple IP via venet is good for only class-C
=(255.255.255.0), not effective for /22 =(255.255.252.0).

Of course I defined eth0 with xx.xx.xx.xx/255.255.252.0.

Would you please advice me again ?

 

[marotori]

Why not use 'bridge mode'?

Then configure the IP in the OS standard way using eth0?

rob

 

[yugawara]

Dear

Since I'm using the 'bond mode' already, 'Bridge mode' can not be used.

And I don't like to place any other servers under the 'Bridge mode'.
I like to place all servers to /22 flat aria.
Then, I like to assign dispersed IPs to the ProcmoxVE for security reason.

So, 'Bridge mode' not suitable I think.

Yugawara