Configure IP Address of Proxmox

[yunmkfed]

Hi,

I am trying to setup a home lab proxmox. My network is 192.168.16.0/24. I want my proxmox server to get 192.168.16.10 and the gateway and dns servers are 192.168.16.1.

During setup, on the network screen I entered the network as 192.168.16.10/32.

After Proxmox booted I can't ping the server (I can ping other devices on my network) and can't log into the network interface (times out).

Thanks

 

[bbgeek17]

During setup, on the network screen I entered the network as 192.168.16.10/32.

https://www.calculator.net/ip-subne...t=32&cip=192.168.16.10&ctype=ipv4&x=Calculate

The important, for you, portion is:

Total Number of Hosts:	1

My network is 192.168.16.0/24

If you intended network is /24, then all hosts should be on that network.
/32 is one host, /24 is 254

---

Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox

 

[yunmkfed]

So that setting is not the IP of the machine only but also of the network. My reasoning was that with a DHCP server, Proxmox (and the guests on it) go to this device for their IP address.

It should be 192.168.16.10/24. I will reinstall and report back.

When I installed it initially I wasn't connected to the network. This time round it picked all settings automatically.

 

[bbgeek17]

It should be 192.168.16.10/24. I will reinstall and report back.

you could just edit /etc/network/interfaces file and reboot

---

Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox