Hello everyone.
I have a problem with my network configuration and my switch, which is a HP 2900.
Here is the bond configuration.
auto bond0
iface bond0 inet manual
slaves eth0 eth1
bond_miimon 100
bond_mode active-backup
auto vmbr0
iface vmbr0 inet static
address 10.10.10.40
netmask 255.255.255.0
gateway 10.10.10.1
bridge_ports bond0
bridge_stp off
bridge_fd 0
My problem is that the switch is reporting eth0 as up and down, then reports eth1 as up, then as down. If the bond is configure to be active-backup, this means that the NICs are going ON and OFF. I have an idea that the "bond_miimon 100" is causing this problem.
Please Help.
I have a problem with my network configuration and my switch, which is a HP 2900.
Here is the bond configuration.
auto bond0
iface bond0 inet manual
slaves eth0 eth1
bond_miimon 100
bond_mode active-backup
auto vmbr0
iface vmbr0 inet static
address 10.10.10.40
netmask 255.255.255.0
gateway 10.10.10.1
bridge_ports bond0
bridge_stp off
bridge_fd 0
My problem is that the switch is reporting eth0 as up and down, then reports eth1 as up, then as down. If the bond is configure to be active-backup, this means that the NICs are going ON and OFF. I have an idea that the "bond_miimon 100" is causing this problem.
Please Help.