Thanks for any help on this....
Had a newly installed 1.9 box for testing setup.
auto lo
iface lo inet loopback
iface eth0 inet manual
auto vmbr0
iface vmbr0 inet static
address 10.10.10.10
netmask 255.255.255.0
gateway 10.10.10.1
bridge_ports eth0
bridge_stp off
bridge_fd 0
Added a second bridge (vmbr1) and attached it to eth1 in GUI, rebooted and can no longer connect to GUI.
Manually deleted all but above in interfaces file and rebooted, still no luck.
I can ping from the CLI on the box out to IP and FQDN, can not ping to 10.10.10.10 from LAN.
Any ideas?
Had a newly installed 1.9 box for testing setup.
auto lo
iface lo inet loopback
iface eth0 inet manual
auto vmbr0
iface vmbr0 inet static
address 10.10.10.10
netmask 255.255.255.0
gateway 10.10.10.1
bridge_ports eth0
bridge_stp off
bridge_fd 0
Added a second bridge (vmbr1) and attached it to eth1 in GUI, rebooted and can no longer connect to GUI.
Manually deleted all but above in interfaces file and rebooted, still no luck.
I can ping from the CLI on the box out to IP and FQDN, can not ping to 10.10.10.10 from LAN.
Any ideas?