Hi,
I am testing Proxmox 2.0-18 16283a5a. It looks fantastic, but I am experiencing a few quite annoying issues.
My server has 2 nodes connected to 2 NAS / iscsi via 2 dedicated switches (with 802.3ad enabled)
1) Often but now always, the web GUI shows the second node as unavailable. Likewise if I load the web interface of the second node the first node is shown as unavailable. I can access each node via web GUI and ssh.
2) I have 2 iscsi target which I would like to configure as mirrors (RAID 1). Proxmox web GUI does not seems to support this so I configured it via CLI as follows:
I tried to restart both nodes several times but same result.
Please HELP!
I am testing Proxmox 2.0-18 16283a5a. It looks fantastic, but I am experiencing a few quite annoying issues.
My server has 2 nodes connected to 2 NAS / iscsi via 2 dedicated switches (with 802.3ad enabled)
1) Often but now always, the web GUI shows the second node as unavailable. Likewise if I load the web interface of the second node the first node is shown as unavailable. I can access each node via web GUI and ssh.
2) I have 2 iscsi target which I would like to configure as mirrors (RAID 1). Proxmox web GUI does not seems to support this so I configured it via CLI as follows:
- i have connected the 2 iscsi targets (3Tb each) via web GUI
- open up a console (CLI)
- created GPT partition table with parted
- #pvcreate /dev/sdb1 /dev/sdc1
- #vgcreate VMs /dev/sdb1 /dev/sdc1
- #lvcreate -l 50%FREE -m1 -n vmlg01 VMs --corelog
- #mkfs.ext4 /dev/VMs/vmlg01
- #vgchange -ay VMs (on both nodes)
I tried to restart both nodes several times but same result.
Please HELP!