error with pve cluster and pve manager

H

hec

Renowned Member
Jan 8, 2009
278
18
83
Wien
www.vector-its.at
Today i run an apt-get update && apt-get dist-upgrade and then proxmox has a broken package.

Code: 
Setting up pve-cluster (1.0-8) ...Starting pve cluster filesystem : pve-clusterfuse: mountpoint is not empty
fuse: if you are sure this is safe, use the 'nonempty' mount option
 (warning).
invoke-rc.d: initscript pve-cluster, action "start" failed.
dpkg: error processing pve-cluster (--configure):
 subprocess installed post-installation script returned error exit status 255
configured to not write apport reports
                                      dpkg: dependency problems prevent configuration of pve-manager:
 pve-manager depends on pve-cluster; however:
  Package pve-cluster is not configured yet.
dpkg: error processing pve-manager (--configure):
 dependency problems - leaving unconfigured
configured to not write apport reports
                                      Errors were encountered while processing:
 pve-cluster
 pve-manager
E: Sub-process /usr/bin/dpkg returned an error code (1)

How can this be fixed?
 
try restarting and boot system maintenance mode [ 2-nd line in grub here ].

log in as root.

then

Code: 
ls -l /etc/pve

AFAIK that should be empty. fuse file systems give that warning when there is an attempt to mount on a directory which is not empty.

if it is not empty I would do this

Code: 
mv /etc/pve /etc/pve.old
mkdir /etc/pve

then resume normal boot by pressing ctl+d
 
Hello all i am new here and having difficulty getting proxmox 2.0 beta to install on Debian sqeeze. Getting the same error see below, I have tried the recovery boot and /etc/pve is empty. I would like to know how the original other fixed this problem as
I fixed this problem is not really enough infos. He mentions something about apache certs, but it is very unclear how he manged to fix this.

I have followed the install doc to the letter and am running the correct kernel.
Code: 
uname -a
Linux debian 2.6.32-6-pve #1 SMP Mon Sep 26 10:35:47 CEST 2011 x86_64 GNU/Linux

NOTE get the following error while updating the kernel but the system seems fine and i have working network.
Code: 
                        Setting up pve-kernel-2.6.32-6-pve (2.6.32-46) ...  
 update-initramfs: Generating /boot/initrd.img-2.6.32-6-pve  
 W: Possible missing firmware /lib/firmware/tigon/tg3_tso5.bin for module tg3  
 W: Possible missing firmware /lib/firmware/tigon/tg3_tso.bin for module tg3  
 W: Possible missing firmware /lib/firmware/tigon/tg3.bin for module tg3


My sources.lists looks like this do i need contrib at the end of the line? or could i just leave sources.list as is, and just add the last PVE repository? NOTE i also disabled the Volitle repsitories all seemed to make no difference and i continue getting errors.

Code: 
##### Commented out for PVE
#deb http://ftp3.nrc.ca/debian/ squeeze main
#deb-src http://ftp3.nrc.ca/debian/ squeeze main
#####

# for PVE
deb http://ftp.at.debian.org/debian squeeze main contrib

##### Commented out for PVE
#deb http://security.debian.org/ squeeze/updates main
#deb-src http://security.debian.org/ squeeze/updates main
#####

# For PVE
deb http://security.debian.org/ squeeze/updates main contrib

##### Commented out for PVE
# squeeze-updates, previously known as 'volatile'
#deb http://ftp3.nrc.ca/debian/ squeeze-updates main
#deb-src http://ftp3.nrc.ca/debian/ squeeze-updates main
#####

# PVE packages provided by proxmox.com
deb http://download.proxmox.com/debian squeeze pve

The errors mentioned above

Code: 
root@debian:/home/c0mputerking# aptitude install proxmox-ve-2.6.32
The following NEW packages will be installed:
  apache2{a} apache2-mpm-prefork{a} apache2-utils{a} apache2.2-common{a}
 
<...SNIP...>
Setting up rrdcached (1.4.3-1) ...
Starting RRDtool data caching daemon: rrdcached.
Setting up pve-cluster (1.0-9) ...
Starting pve cluster filesystem : pve-cluster (warning).
invoke-rc.d: initscript pve-cluster, action "start" failed.
dpkg: error processing pve-cluster (--configure):
 subprocess installed post-installation script returned error exit status 255
configured to not write apport reports
                                      dpkg: dependency problems prevent configuration of libpve-access-control:
 libpve-access-control depends on pve-cluster; however:
  Package pve-cluster is not configured yet.
dpkg: error processing libpve-access-control (--configure):
 dependency problems - leaving unconfigured
Setting up libopenais3-pve (1.1.4-1) ...
configured to not write apport reports
                                      Setting up corosync-pve (1.4.1-1) ...
Setting up openais-pve (1.1.4-1) ...
dpkg: dependency problems prevent configuration of redhat-cluster-pve:
 redhat-cluster-pve depends on pve-cluster; however:
  Package pve-cluster is not configured yet.
dpkg: error processing redhat-cluster-pve (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of clvm:
 clvm depends on redhat-cluster-pve; however:
  Package redhat-cluster-pve is not configured yet.
dpkg: error processing clvm (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of libpve-storage-perl:
 libpve-storage-perl depends on clvm; however:
  Package clvm is not configured yet.
dpkg: error processing libpve-storage-perl (--configure):
 dependency problems - leaving unconfigured
Setting up libvncserver0 (0.9.7-2+b1) ...
configured to not write apport reports
                                      configured to not write apport reports
                                                                            configured to not write apport reports
                                  Setting up pve-firmware (1.0-13) ...
Setting up vncterm (1.0-2) ...
Setting up libaio1 (0.3.107-7) ...
Setting up pve-qemu-kvm (0.15.0-1) ...
dpkg: dependency problems prevent configuration of qemu-server:
 qemu-server depends on libpve-storage-perl; however:
  Package libpve-storage-perl is not configured yet.
 qemu-server depends on pve-cluster; however:
  Package pve-cluster is not configured yet.
 qemu-server depends on redhat-cluster-pve; however:
  Package redhat-cluster-pve is not configured yet.
dpkg: error processing qemu-server (--configure):
 dependency problems - leaving unconfigured
Setting up vlan (1.9-3) ...
configured to not write apport reports
                                      dpkg: dependency problems prevent configuration of pve-manager:
 pve-manager depends on qemu-server (>= 1.1-1); however:
  Package qemu-server is not configured yet.
 pve-manager depends on pve-cluster; however:
  Package pve-cluster is not configured yet.
 pve-manager depends on libpve-storage-perl; however:
  Package libpve-storage-perl is not configured yet.
 pve-manager depends on libpve-access-control; however:
  Package libpve-access-control is not configured yet.
 pve-manager depends on redhat-cluster-pve; however:
  Package redhat-cluster-pve is not configured yet.
dpkg: error processing pve-manager (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of proxmox-ve-2.6.32:
 proxmox-ve-2.6.32 depends on pve-manager; however:
  Package pve-manager is not configured yet.
 proxmox-ve-2.6.32 depends on qemu-server; however:
  Package qemu-server is not configured yet.
dpkg: error processing proxmox-ve-2.6.32 (--configure):
 dependencyconfigured to not write apport reports
                                                 configured to not write apport reports
        problems - leaving unconfigured
Setting up libbsd-resource-perl (1.2904-1) ...
Errors were encountered while processing:
 pve-cluster
 libpve-access-control
 redhat-cluster-pve
 clvm
 libpve-storage-perl
 qemu-server
 pve-manager
 proxmox-ve-2.6.32
E: Sub-process /usr/bin/dpkg returned an error code (1)
A package failed to install.  Trying to recover:
Setting up pve-cluster (1.0-9) ...
Starting pve cluster filesystem : pve-cluster (warning).
invoke-rc.d: initscript pve-cluster, action "start" failed.
dpkg: error processing pve-cluster (--configure):
 subprocess installed post-installation script returned error exit status 255
dpkg: dependency problems prevent configuration of pve-manager:
 pve-manager depends on pve-cluster; however:
  Package pve-cluster is not configured yet.
dpkg: error processing pve-manager (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of proxmox-ve-2.6.32:
 proxmox-ve-2.6.32 depends on pve-manager; however:
  Package pve-manager is not configured yet.
dpkg: error processing proxmox-ve-2.6.32 (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of libpve-access-control:
 libpve-access-control depends on pve-cluster; however:
  Package pve-cluster is not configured yet.
dpkg: error processing libpve-access-control (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of qemu-server:
 qemu-server depends on pve-cluster; however:
  Package pve-cluster is not configured yet.
dpkg: error processing qemu-server (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of redhat-cluster-pve:
 redhat-cluster-pve depends on pve-cluster; however:
  Package pve-cluster is not configured yet.
dpkg: error processing redhat-cluster-pve (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of clvm:
 clvm depends on redhat-cluster-pve; however:
  Package redhat-cluster-pve is not configured yet.
dpkg: error processing clvm (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of libpve-storage-perl:
 libpve-storage-perl depends on clvm; however:
  Package clvm is not configured yet.
dpkg: error processing libpve-storage-perl (--configure):
 dependency problems - leaving unconfigured
Errors were encountered while processing:
 pve-cluster
 pve-manager
 proxmox-ve-2.6.32
 libpve-access-control
 qemu-server
 redhat-cluster-pve
 clvm
 libpve-storage-perl

PS I also get an error about mounting none on dev failed hoping it is not related, and cannot find any mention of it in the logs just on the console during boot up.
 
I do not know the cause of the problem but I would boot maintenance mode and run the update.

from what I see at runlevel 1 /etc/init.d/pve* stuff is not started. so maybe 'aptitude safe-upgrade' will finish the update.

for the tg3 firmware try installing firmware-linux-free . if that does not work try adding non-free to sources.list and install firmware-linux-nonfree .
 
I already tried installing from maintenance mode, and just tried a aptitude safe-upgrade which yielded the same errors.

As for the firmware-linux-free i get this so i just quit the installer as i think i should stick to the pve firmware right?

aptitude install firmware-linux-free
The following NEW packages will be installed:
firmware-linux-free
The following partially installed packages will be configured:
clvm libpve-access-control libpve-storage-perl proxmox-ve-2.6.32 pve-cluster pve-manager
qemu-server redhat-cluster-pve
0 packages upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 151 kB of archives. After unpacking 283 kB will be used.
The following packages have unmet dependencies:
pve-firmware: Conflicts: firmware-linux-free but 2.6.32-35squeeze2 is to be installed.
The following actions will resolve these dependencies:

Remove the following packages:
1) proxmox-ve-2.6.32
2) pve-firmware



Accept this solution? [Y/n/q/?] q
Abandoning all efforts to resolve these dependencies.
Abort.
 
it is good you choose not to remove those.... and you probably can ignore the tg3 warnings as your network is working.

I do not have another suggestion regarding the partially installed packages .
 
So it works for everyone but me on Debian squeeze? this is a fresh install on real hardware too!
 
sounds like you've run into a bug. the thing is to report it .

the devs are I think mostly from Europe, so wait until 9am or so their time to expect a response.

also there is a proxmox tracking system. use it to check on and report this issue.
 
Do you use DHCP? If so, that will not work. You need to install debian using a fixed network address.
 
Thank you for the reply, and I did use DHCP (the default) during the install but i have since switched to static now, but still get the same error when tryng to install proxmox. Any reason this might not be working even after being switched to static?

Here is my /etc/networking/interfaces

Code: 
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
#allow-hotplug eth0
#NetworkManager
#auto eth0
#iface eth0 inet dhcp

auto eth0
iface eth0 inet static
        address 192.168.1.2
        network 192.168.1.0
        broadcast 192.168.1.255
        netmask 255.255.255.0
        gateway 192.168.1.1

and my hosts file

Code: 
127.0.0.1       sun     localhost.localdomain   localhost

192.168.1.2     sun     sun.xxxxx.com     sun

127.0.1.1       sun.xxxxxx.com     sun

# The following lines are desirable for IPv6 capable hosts
::1     ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
 
Your hosts file looks broken. Do not use 'sun' as name for localhost. And what is the output of

# hostname
 
To c0mputerking:
I've done an instalation from a clean squeeze instalation like you (with dhcp and modifying /etc/network/interface after) and I got the same trouble.

The trouble was with pve-cluster that couldn't start.

I've commented in /var/lib/dpkg/info/pve-cluster.postinst those line (remember to uncomment it after you solved it):
Code: 
        if [ -x "`which invoke-rc.d 2>/dev/null`" ]; then
                invoke-rc.d pve-cluster $_dh_action || exit $?
        else
                /etc/init.d/pve-cluster $_dh_action || exit $?
        fi
and try to start pve-cluster manually and continue the instalation with apt-get install -f

My trouble was with an error about bad resolution name and updating the /etc/hosts with the hostname and IP solved it.

Hope it could help.
 
The output of my hostname is
Code: 
~$ hostname
sun

I thought my host file looked pretty standard can you recommend what the host file should look like?

also as an aside apache complained about not being able to determine a hostname and that it would use 127.0.0.1 each time it started up. I fixed this error by placing a ServerName sun.xxxxxxx.com directive in my httpd.conf file.

I have not tried commenting out the lines in pve-cluster-post.inst file yet, would this be necessary even with a properly formed hostfile and correct name resolution.
 
I pass from the same problem and edited my hosts file and fix the machine name according with my local test ip and working and pass dpkg installer rotines.
root@proxmox:~# cat /etc/hosts
127.0.0.1 localhost
192.168.0.5 proxmox.xxxx.sytes.net proxmox

ps i modified eth0 into vmbr0 like proxmox 1.X series. i´m testing now and will be put results here.
 
Yep modified my hosts file and got past the errors thanks everyone for your help. I would mark this thread SOLVED but it is not mine
 
I couldn't get rid of the errors :(

Changed /etc/hosts... but it didn't help. Any ideas?

Code: 
pm:/home/npe# aptitude install -f

...

pm:/home/npe# screen -S upgrade redhat-cluster-pve
 clvm
 libpve-storage-perl
 qemu-server
 pve-manager
E: Sub-process /usr/bin/dpkg returned an error code (1)
A package failed to install.  Trying to recover:
Setting up pve-cluster (1.0-9) ...
Starting pve cluster filesystem : pve-clusterfuse: mountpoint is not empty
fuse: if you are sure this is safe, use the 'nonempty' mount option
 (warning).
invoke-rc.d: initscript pve-cluster, action "start" failed.
dpkg: error processing pve-cluster (--configure):
 subprocess installed post-installation script returned error exit status 255
dpkg: dependency problems prevent configuration of pve-manager:
 pve-manager depends on pve-cluster; however:
  Package pve-cluster is not configured yet.
dpkg: error processing pve-manager (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of libpve-access-control:
 libpve-access-control depends on pve-cluster; however:
  Package pve-cluster is not configured yet.
dpkg: error processing libpve-access-control (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of qemu-server:
 qemu-server depends on pve-cluster; however:
  Package pve-cluster is not configured yet.
dpkg: error processing qemu-server (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of redhat-cluster-pve:
 redhat-cluster-pve depends on pve-cluster; however:
  Package pve-cluster is not configured yet.
dpkg: error processing redhat-cluster-pve (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of clvm:
 clvm depends on redhat-cluster-pve; however:
  Package redhat-cluster-pve is not configured yet.
dpkg: error processing clvm (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of libpve-storage-perl:
 libpve-storage-perl depends on clvm; however:
  Package clvm is not configured yet.
dpkg: error processing libpve-storage-perl (--configure):
 dependency problems - leaving unconfigured
Errors were encountered while processing:
 pve-cluster
 pve-manager
 libpve-access-control
 qemu-server
 redhat-cluster-pve
 clvm
 libpve-storage-perl
 
You must log in or register to reply here.

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Quick Navigation

Home Get Subscription Wiki Downloads Proxmox Customer Portal About

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!
Community platform by XenForo® © 2010-2024 XenForo Ltd.
Top Bottom
Back