Hi,
i am facing some problem with my fencing configuration can any one please help me. my setup follows
step1 : I have 3 node cluster - node1, node2 @ node3 installed with proxmox 3.3.
n1-192.168.100.1 @ 10.0.0.120
n2-192.168.100.2 @ 10.0.0.122
n3-192.168.100.3 @ 10.0.0.124 are the bridge ips.
cluster name-cluster.
i just want to use 192.168.x.x for host @ vms traffic and 10.0.0.x for storage traffic.
step2 : I am configured ceph shared storage on all nodes-firefly version.
mon ips are n1-10.0.0.120 , n2-10.0.0.122 , n3-10.0.0.124
osd no - 3 each node has 1 disk
pool name - ceph pool
step3 : i am using cisco 3750 switch as fence device.
i am connected all 3 nodes interfaces to cisco switch. and i am assigned ip 10.0.0.150 for the switch to configure snmp.
i am configured snmp to block port of failed node.
step : i am modified new cluster file but i am getting some validation errors and following is my script.
i am unable to find where i did mistake pls help me
thanks in advance
i am facing some problem with my fencing configuration can any one please help me. my setup follows
step1 : I have 3 node cluster - node1, node2 @ node3 installed with proxmox 3.3.
n1-192.168.100.1 @ 10.0.0.120
n2-192.168.100.2 @ 10.0.0.122
n3-192.168.100.3 @ 10.0.0.124 are the bridge ips.
cluster name-cluster.
i just want to use 192.168.x.x for host @ vms traffic and 10.0.0.x for storage traffic.
step2 : I am configured ceph shared storage on all nodes-firefly version.
mon ips are n1-10.0.0.120 , n2-10.0.0.122 , n3-10.0.0.124
osd no - 3 each node has 1 disk
pool name - ceph pool
step3 : i am using cisco 3750 switch as fence device.
i am connected all 3 nodes interfaces to cisco switch. and i am assigned ip 10.0.0.150 for the switch to configure snmp.
i am configured snmp to block port of failed node.
step : i am modified new cluster file but i am getting some validation errors and following is my script.
i am unable to find where i did mistake pls help me
thanks in advance