Moin zusammen,
für ein Projekt habe ich einen Proxmox Server 8.x laufen. Neben dem regulären Netzwerk, habe ich für eine zweites Netzwerkfreigabe einer anderen Abteilung erhalten.
Ziel ist es einzelne Dienste über eine pfsense FW zu Routen. Von meinem Proxmox-Server wurde eine explizite MAC...
Hello everyone,
We would like to use Proxmox on a Cisco UCS B200 M-Series Blade. We've already installed the latest Proxmox version on the Host.
From the network side on the switch we've configured two LACPs which has 4 ports each. With the VLANs 9 for management and 201, 4092 for data. This...
Hallo,
ich bin neu in Proxmox und hätte eine Frage zur Netzwerkkonfiguration.
Ich möchte einen Proxmox Host wie folgt am Netzwerk anbinden: Der Host verfügt über 4x1Gb Netzwerkanschlüsse. Diese würde ich auf zwei Switches aufteilen (Switch 1 & 2). Diese haben die selbe LACP Konfiguration.
Am...
I really like the feature to disable mac address learning at all (bridge-disable-mac-learning 1) which was integrated in PVE 7.2.
Currently, the forwarding database is only populated on a start / reboot / reset of vms.
Are there any plans to enhance this database population for events like...
I had Wireguard setup and everything run fine. But if I change proxmox bridge vmbr0 ports to another port or bond the interface is now inaccessible while using VPN (see chart). Cant ping bridge IP neither but everything else run fine. ip route get output from proxmox to vpn client: 192.168.2.2...
Hi,
I would like to migrate two NICs - i226-V (facing LAN) to OVS mainly due to RSTP functionality.
Bridge in question is vmbr23 and is used for all VMs including, OPNsense VM as interface to LAN. After applying changes - I use this as delayed fallback:
ifreload -a; (sleep 120; cp...
I'm another vmware admin who's looking at Proxmox as a potential transition option. I'm not doing anything particularly intensive, I just deployed a few hypervisor VMs (under ESXi) to get a feel for the system, deploying VMs, networking, etc.
Everything is working fine so far, other than the...
tl;dr:
I want to pipe VLANs around my networks, both the physical and virtual sections, to separate things like IoT out.
Some more detail:
I have a network consisting of Proxmox VE containers and VMs (one being OPNsense firewall router), and physical network components such as UniFi switches...
Hallo zusammen,
auf meinem Proxmox System laufen mehrere Ubuntu-Container (LXC).
Die Container sind über vmbr0 mit dem Heimnetz und dem Router verbunden. Darüber wird der Internetzugang bereitgestellt.
Ich habe ein zweites Netzwerk auf Proxmox angelegt, vmbr1, das nur dazu dienen soll, die...
Hi all, I am trying to configure my proxmox server network so that I can split VM and CT. Unfortunately with poor results.
This is my configuration. If anyone can help me out, I would be very grateful. PS: I only have one NIC.
Please, can someone help me?
auto lo
iface lo inet loopback...
Hallo zusammen,
ich arbeite mich aktuell mit den verschiedenen Optionen der SDN ein.
Dabei ist mir aufgefallen, dass wenn ich SNAT anharke oder generell up und down-Regeln in den Interfaces hinzufüge diese mehrfach angelegt aber nie gelöscht werden.
auto default0
iface default0...
Hello there! I was wondering if someone could possibly assist me with a little something. You see, I'm quite new to promox ve and I have this goal of hosting my very own web server and setting it up as a DMZ. Additionally, I have a few other VM's that I need to run on the machine and I would...
Hi, I'm completely lost configuring proxmox network interfaces.
What I would like to achieve is having a pfsense in front of all the vms. But at the moment I can't even get a single vm (pfsense or ubuntu) to have access to internet.
I have been trying to use this configuration :OVH Scale server...
I am trying to add a 2.5" SSD to my system using the Accelsior S PCIe adapter card.
When I add the card to the system and boot, I can see the disk drive in fdisk as well as format, add/remove partitions etc.
But then my ethernet connection is broken:
Jan 13 14:26:08 pve-1 networking[887]...
When I installed Proxmox 8.04, the vmbr0 was created automatically. Now I added a new network card and created a new bridge vmbr1
After applying the config, the /etc/network/interfaces is updated accordingly
auto lo
iface lo inet loopback
iface enp4s0 inet manual
iface enp5s0 inet manual...
Hi, I have network bridge consisting of 2 hardware nic's (ports). I would like to set one port as trunk (this works on enp2s0) and the other as access port (for selected vlan on iface enp3s0). Currently both ports/nic work as trunk ports and I can't find solution for above. Traffic reaching this...
hello im new to proxmox
and I have this program running and trying to send multiple connections using vlans.
my problem is it only allow me to use 1 vlan connection
this means that if I use or add 2 or more vlan ids all vlan connection won't go through.
I have the following problem.
Two pve's are connected to each other with 10Gbit cards.
MYRICOM Inc. Myri-10G Dual-Protocol NIC (rev 01).
Each card has two ports, these two ports are located in the same vmbr0 bridge on each host.
One of the PVEs has a Debian virtual machine on it, which is...
I currently have two proxmox Metals in Scaleway Cloud. Yesterday I bought my second one but with the first one I didn't have any issue. So my setup in the first one is a pfsense firewall with a WAN and a LAN in 192.168.1.0/24. Now I introduced the second Metal and created another pfsense (I know...
If Debian 12 has been installed with minimal network boot CD/ISO/USB then it probably does not include bridge-utils which is mandatory component to get vmbr bridges to work.
Make sure you install it with apt install bridge-utils first then fix these files /etc/hosts and /etc/network/interfaces...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.