Since pve v5, I've struggled with getting a usable video resolution on the proxmox console. Especially with servers that have VGA output, proxmox tends to default to the highest possibly supported resolution, often leaving the KVM or rack-mounted-VGA out of range.
Up to this point, I've been...
Hallo, wenn ich eine Shell per API anfrage ist diese über VenCrypt verschlüsselt.
Mein WebSocket zu VNC Proxy bietet aber keinerleie möglichkeiten dieses Protokol zu entschlüsseln.
Wenn ich mir anschaue wie ProxMox die Shell selbst startet ist mir ein ``-notls`` Argument aufgefallen.
Wenn ich...
Hi!
so I switched back from ESXi to Proxmox and I am now having issues getting video output over VGA/IPMI. The motherboard is the Supermicro H11SSL-i. As soon as a VM starts, the console goes blank. When I look at the syslog, I see the following output:
Feb 01 12:42:50 proxmox pvedaemon[4247]...
i gotta problem
ailed waiting for client: timed out
TASK ERROR: command '/usr/bin/termproxy 5900 --path /nodes/pve --perm Sys.Console -- /usr/bin/pveupgrade --shell' failed: exit code 1
on shell command,
and console noVNC wont work.
it worked normally, now it doesn't. I don't know exactly...
Greets and Happy belated New Year! I just started having problems with a 4 node cluster running different machines - running latest Proxmox VE version - NEVER had console or terminal issue until just recently (only added a new switch to the network) - now when I open a console from the Proxmox...
I have several VMs that I've configured with a serial console, however I'm not able to copy/paste into the html5 view like I can on containers. Is there a way to resolve this?
Currently I ssh into the VE host and run minicom against the serial socket, but would like to have the webui available.
I tried the the consoles that come with Proxmox and none of them will launch to connect with my containers or vms. They error no matter what I do.
Sep 29 08:35:46 proxmox pvedaemon[205498]: command '/usr/bin/termproxy 5900 --path /vms/100 --perm VM.Console -- /usr/bin/dtach -A...
It has been problematic for quite some time with the default function of LXCs where when you change to another LXC and then back, you lose your terminal/console history. Is there a method available to retain this outside of opening the console in its own window?
Organizationally, when working...
Running Prxomox VE 7.4-3 and opening the PVE web page in Chrome Version 114.0.5735.198 (Official Build) unknown (64-bit), I noticed that one of my machines running Xubuntu the console tab for VMs and containers worked perfectly. On another machine, running straight Ubuntu and the same version of...
Hello,
i installed a Pfsense 2.6 in proxmox 7.4 ( Edge configuration), routing all Wan trafic to Pfsense and add some rules
after activating the rules
i had this issue :
failed waiting for client: timed out
TASK ERROR: command '/usr/bin/termproxy 5900 --path /nodes/proxmox-01 --perm Sys.Console...
*** TL;DR BELOW ***
Hi there,
After quite a few weeks of thinking about it, I finally pulled the plug and bought a domainfor myself :D so that I could finally start implementing and understanding a more realistic use case for all my LXCs and VMs: shame on me for waiting too long. Now, using...
Good morning, I have a problem with the consoles of a cluster.
I cannot see the console of the virtual machines if I am not logged in to the node. I do not know if I explained well.
If I log in to node1 I can't see the console of the virtual machines on node2.
If you can help me?
Regards and...
I would like to setup my geust machine (Windoes 11) to sleep after some time. It helps to save energy. However, after going to sleep, it doesn't log in anymore via consoles or RDP.
I use SPICE on Proxmox 7.3-4
Hello everyone, I hope you are very well and can help me, I happen to have a version of PVE 6.0-4 and recently I have experienced strange behavior on my VMs.
I noticed this in the backup task, because it began to throw an error "got timeout", this only happened with a couple of VMs, but over...
Has anyone installed chromium and had the console switch to it one boot?
I think it would be nice to beable to admin proxmox if there was a network issue from the GUI physically on the system.
I have a single 6.4-15 proxmox node with some containers and VM.
For all my containers console look like:
For all my VM I can only write the following characters:
I can't write "/", which limits a lot to navigate through the FS or to set IP/CIDR.
This is locking me out of a backuped VM...
The PVE GUI returns S.M.A.R.T. status unknown on my external disk. This mirrors what smartctl tells me on the command line
root@pve:~# smartctl -a /dev/sda
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.60-1-pve] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke...
Hello
Reading through the API call I can successfuly make request to the following endpoints:
post - api2/json/access/ticket
post - api2/json/nodes/node/lxc/vmid/vncproxy
get api2/json/nodes/node/lxc/vmid/vncwebsocket
From these (besides other things) I have the pvevnc-ticket, the websocket...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.