install

  1. B

    Install specific version of ceph reef

    I have an existing ProxMox Ceph cluster with ceph v18.2.1. I want to add a new host to the cluster but the ceph version it installs is 18.2.2 so I get warnings about a mismatch. How do I install the 18.2.1 version on my new host? The command I'm using is: pveceph install --repository...
  2. S

    Unable to connect to web GUI after fresh install

    Hi guys, I'm new to proxmox, just installed it but I'm unable to access the web admin portal (https://192.168.1.1:8006). Some additional details: i can ping the server I can ssh to the server the web portal does seem to be active and bound to the tcp 8006 socket I took a wireshark trace...
  3. N

    Is ZFS recommended for single node with heavy use of passthrough ?

    Finally got all the parts for my home server and currently testing. I plan to have SR-IOV passthrough for VM networking, HBA passthrough for storage VM. This means i can't take live snapshots and because it's just one node i don't need replication. Without using 2 major benefits of ZFS, should...
  4. R

    Is there any way to verify my installation media is correct?

    I downloaded the install media and followed the instructions to prepare the installation media on a Mac. I think the instructions are a little out of date and after what I THINK were the correct steps, I got the message below which made me think something went wrong. After using the command...
  5. S

    USV Powerwalker VI 1500 CSW

    Hallo und frohe Ostern. Vor über einem Jahr habe ich mir die o.g. USV gekauft und möchte diese jetzt für mein neu installiertes Proxmox mit IOBroker integrieren. Über den BlueWalker Support bekam ich folgende Antwort: "quote Bitte laden Sie die Software herunter und verwenden Sie den unten...
  6. R

    Proxmox install - ZFS on NVME, RAID1 does it make sense ?

    Hello everyone I been testing ZFS on NVME Drives. Installed proxmox on 2 NVME drives: They are SN: 7VQ09JY9 7VQ09H02 Filesystem: ZFS Raid 1 (mirroring) Reboot to installed proxmox and check: zpool status -L pool: rpool state: ONLINE config: NAME STATE READ WRITE...
  7. N

    Proxmox Storage

    Hello, I am new to this forum today, and I already have a question. I switched from ESXI to Proxmox, and the first experiences are already great (I regret not switching sooner). Now I see that 2 partitions are created by default: Local Local-lvm Now I also see that this can be combined into...
  8. S

    unable to create zfs root pool

    I have a dl380p gen8 with a p420i controller in hba mode. 2 SSDs (OS) and 6 HDDs (DATA) are installed. I tried to install Proxmox on the two SSDs in RAID 1 (ZFS). I was able to select the two hard drives and started the installation, but I got the following error message: unable to create zfs...
  9. I

    Proxmox on VirtualBox: No Support for hardware-accelerated KVM virtualization detected.

    Hi guys, I managed to get Proxmox set up on my VirtualBox, but when I get to the second screen of the installer, I am greeted with this error message. I am not sure what to do, as I would not be able to launch Proxmox in VirtualBox if I did not have SVM enabled in bios, so I am at a complete...
  10. M

    Raid setup

    Hi, I have 3 dell servers and while purchasing I mentioned that we need RAID 1 on all 3 drives. While installing Proxmox it also asks for types of drive and raid levels. Do I need to mention raid level here?
  11. S

    [SOLVED] Problems installing 8.1 and iscsi/multipath on root filesystem on HPE BL660c blade with HPE 650FLB hba/nic

    Hello, I'm working on a poc to install proxmox on an HPE BL660c blade connected to an iSCSI san using be2iscsi based controller/nics. I have it mostly installed and working, though I've run into a problem with iscsi. I've been reading through the forums and googling for both proxmox and debian...
  12. N

    Problems with Proxmox VE 8.1-1

    I'm not really looking for support here because I have everything working now with 8.0 and that's enough. I'm more writing as a 'bug report' of sorts. I have purchased a new box intended for use as a router/firewall/etc with Proxmox VE at the top level. i7-1265u, 64Gb DDR4-3200 RAM, 1Tb main...
  13. A

    How do I get the serial number of the disks during installation?

    When I install Proxmox 8.0.2, I get: I have four absolutely same disks I have data on two disks, but I do not know which disks, I only know the serial numbers of these disks. How can i get serials some as: /dev/sda --- 2332E86834B7 /dev/sdb --- 2332E86834BA /dev/sdc --- 2332E86834BC /dev/sdd...
  14. D

    [SOLVED] PVE ISO vs Debian PVE via APT install

    I have followed both the standard ISO install (8.0.4) and tried to install another node manually (with custom partitioning) on top of Debian network install with very much nothing else than wget (even skipped system tools in tasksel) and ZFS. The resulting size of the ISO-sourced install (ZFS)...
  15. E

    [ASK] Mount SSD with already installed RouterOS in proxmox ve?

    Sorry I have an SSD with RouterOS already installed and I want to install it on a PC that has Proxmox installed. How can I directly use this SSD as an OS for a VM in Proxmox without deleting its contents and run it straight away?
  16. S

    Manual installation on Debian 12

    If Debian 12 has been installed with minimal network boot CD/ISO/USB then it probably does not include bridge-utils which is mandatory component to get vmbr bridges to work. Make sure you install it with apt install bridge-utils first then fix these files /etc/hosts and /etc/network/interfaces...
  17. L

    Install Proxmox from Grub

    Hello all, This is my first thread I discovered proxmox, I'd like to take the plunge and discover the world of homelab with it. I'm trying to install it on a 2016 Mac that has an Ubuntu OS. I made a Proxmox bootable key, but I have trouble booting on it. When I start my computer with the...
  18. I

    Proxmox install

    I am trying to migrate my Proxmox install to a 1L mini pc, so that I can convert my current much underused server into a second backup NAS. I have a 120GB SATA SSD that I intend to use as a OS drive. I also have a 1TB NVMe drive that I want to use as VM/CT storage and also for PBS backups. The...
  19. P

    pveceph install kept switching to enterprise repo

    On a Proxmox 8.0.4 node, I have the following in /etc/apt/sources.list.d/ceph.list: deb http://download.proxmox.com/debian/ceph-quincy bookworm no-subscription I executed apt update, then run pveceph install But I always received the following message: WARN: Enterprise repository selected...
  20. J

    Install Zabbix Agent on Proxmox Nodes

    Hello, I want to install Zabbix Agent in my Proxmox Nodes but I have issues. Version: Virtual Environment 7.4-3 When I am trying the installation failed due lib requirements The following information may help to resolve the situation: The following packages have unmet dependencies...

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!