Hi Stoiko
i only removed some privacy mail and users... and some monitoring lines which have nothing todo with this
After exporting the pool i can start the vm again. i rebooted also again and its working now...
# zvol_wait
Testing 24 zvol links
All zvol links are now present.
Thank you much !
# zpool status
pool: vms_lnx
state: ONLINE
scan: scrub repaired 0B in 00:24:43 with 0 errors on Sun Feb 13 00:48:44 2022
config:
NAME STATE READ WRITE CKSUM
vms_lnx ONLINE 0 0...
edit: sorry, wrong forum :( can some mod move this to proxmox sever?
hi there,
after reboot from Host, 1 VM can't be started anymore.
TASK ERROR: timeout: no zvol device link for 'vm-700-disk-0' found after 300 sec found.
# zfs list
NAME USED AVAIL REFER...
Hallo zusammen
Habe seit heute Vormittag immer wieder Unterbrüche im Management. Sowohl Webinterface als auch SSH geht dann zu. Alle paar Sekunden ist für ein paar Sekunden alles weg und kommt dann wieder. Unregelmässig, aber alle paar Sekunden
Ein Restart vom Host hat nichts gebracht. Ein...
hi there
i found out, with my internal NIC it's working. But the second NIC (4 Port Ethernet Card) will not work :( but in the old "Server" they worked...
Internal NIC (working):
root@proxmox:~# ethtool -i enp9s0
driver: r8169
version: 5.11.22-1-pve
firmware-version: rtl8168h-2_0.0.2 02/26/15...
Hi there
got new Hardware and setting up proxmox new.
my old config look like this:
auto lo
iface lo inet loopback
iface enp0s31f6 inet manual
iface enp4s0 inet manual
iface enp4s0.20 inet manual
auto enp0s31f6
iface enp0s31f6 inet static
address 10.0.0.10/24
gateway 10.0.0.254...
Hello aaron
Remove the Route did the trick... thank you
Can you maybe explain me, why the existing route has not worked in this case?
root@proxmox:~# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 10.0.0.254...
Hello aaron
Thank you for you Reply. I think i describe the Problem too bad.
The Host (10.0.0.10) is running on vmbr0 without VLAN.
The VM1 (10.0.0.150) is running von vmbr0 without VLAN.
They can Ping each other and 8.8.8.8, no Problem there...
______________________________________
VM2...
Hi there
got a little problem and hope you can help me :)
I added a new Bridge (vmbr1) as a Trunk.
Setup:
Proxmox Server (vmbr0) 10.0.0.10
VM2 (vmbr0) IP 10.0.0.20
VM1 (vmbr1 - tagged VLAN 20) IP 10.0.20.10
Problem:
Proxmox Server can't Ping in the 10.0.20.0/24 Net.
VM1 can ping VM2...
Hi, get an Error with this command:
qm set 120 -machine pc-i44fx-2.11
400 Parameter verification failed.
machine: value does not match the regex pattern
qm set <vmid> [OPTIONS]
pveversion
pve-manager/5.3-5/97ae681d (running kernel: 4.15.18-9-pve)
What do you mean with different Version?
I Try a New Test Install from Windows Server (Same ISO), and the reinstall works... But i need the current installation, there are my configuration on it.
Hi Dominik
What for Info do you need?
This?
cat 120.conf
bootdisk: ide0
cores: 2
cpu: host
ide0: HS-Only:120/vm-120-disk-0.qcow2,backup=0,replicate=0,size=80G
ide1: WinServerDisks:120/vm-120-disk-0.qcow2,size=5G
ide2: WinServerDisks:120/vm-120-disk-1.qcow2,size=5G
ide3...
Hello there
i Upgraded my Proxmox and now my Nested Virtual Windows Server 2016 do not start anymore..
Come to the Windows Logo and then the Machine does a reset...
if i change the CPU to the Default (kvm64) then it starts, but the hyper-v machines can not run...
cat...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.