Thanks @leesteken .
Some time ago I replaced /dev/sdb on same server. This time it should be /dev/sda drive, so that's why I'm worried.
Let's say aaa is good drive, bbb is bad drive and ccc is the new drive
Last time I did this:
#save a backup and loaded on new disk
sgdisk --backup=table...
Hello.
I was tasked to do a disk replacement on a very, very, very old Proxmox installation.
# pveversion
pve-manager/4.3-1/e7cdc165 (running kernel: 4.4.19-1-pve)
The server was installed on ZFS raid 1 Array (mirror).
Before continuing let me say I was told: This server WONT be upgraded. I...
You can config samba to use IPv4 only.
interfaces = your.ipv4.network.address
bind interfaces only = Yes
But if you insist in disabling IPv6 at SO level
I think you could edit /etc/sysctl.conf (not tried yet)
$ sudo nano /etc/sysctl.conf
# add these lines at bottom...
Thanks @matrix.
Do you mean content of /etc/network/interfaces ?
auto lo
iface lo inet loopback
iface eno1 inet manual
auto vmbr0
iface vmbr0 inet static
address 192.168.0.250/24
gateway 192.168.0.1
bridge-ports eno1
bridge-stp off
bridge-fd 0
Thanks Lnxbil & alexskysilk.
This server will not have any database. ERP they use is just a frontend client that connects to a middleware that interacts with database.
I was concerned about having 50 RDS users on virtualized WS2016 on that hardware.
Also 48GB ram seems too little for 50 users...
Hello,
To put some background: I live in Argentina. Our economy is a mess; smal companies can't (or don't want to) afford enterprise grade hardware. So mainly buy budget hardware or (even worst) consumer grade desktop machines AS SERVERS!!!
And then they expect that shitty hardware give...
I can't figure out how it works... I need to read A LOT more about LVM.
I made this test on a VM: installed proxmox as default on a 16GB disk.
So root was 7GB. I ran then:
# lvresize -L+3G pve/root
# touch /forcefsck && reboot
... then ...
# resize2fs /dev/pve/root
and / grew up to 10GB.
Is...
Hi, I installed Proxmox 4.2 on a PC.
As I have 1 disk, I choosed ext4 on install options.
I found that 1TB disk was partitioned
Device Start End Sectors Size Type
/dev/sda1 34 2047 2014 1007K BIOS boot
/dev/sda2 2048 262143 260096 127M EFI System...
Hi to all. I need guidance/advice.
I have a single Proxmox 3.2 server running 2 openvz and 3 KMV.
I'm planning to do a clean install of version 4.2
All I have to do is convert openvz to lxc and backup to external drive, right?
Then, restoring those backups should run without issues.
(saving...
I'm really not sure about where to report this.
I know this is not a Proxmox bug, so I'm asking for guidance (and also to inform this to you).
I have a Proxmox server at home. I made a container and installed Gnome, Xdummy and x11vnc to have a full desktop. So I can access this containerized...
Hi, I have some strange issue with containers.
systemd is not running on containers after proxmox reboots.
This is my setup:
# uname -a
Linux proxmox 4.4.13-2-pve #1 SMP Fri Jul 15 06:36:47 CEST 2016 x86_64 GNU/Linux
# pveversion --verbose
proxmox-ve: 4.2-58 (running kernel: 4.4.13-2-pve)...
Hi,
I have a proxmox server. It's a really small implementation, for my personal use, at my home.
# pveversion -v
proxmox-ve-2.6.32: 3.3-139 (running kernel: 2.6.32-33-pve)
pve-manager: 3.3-5 (running version: 3.3-5/bfebec03)
pve-kernel-2.6.32-33-pve: 2.6.32-138
pve-kernel-2.6.32-29-pve...
I was using vncterm because easy-to-use, just log in and pull the java app.
For spice it's ok on windows but debian has not updated packages, on Arch spice don't show cursor... oh well.
It was less painfull to use vncterm.
Will try spice again
Enviado desde mi GT-I8190L mediante Tapatalk
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.