Search results

Weil ein Raspberrypi mit der SD-Karte recht fehleranfällig ist und ohne Netz ohne Standardbetriebssystem wieder umständlich (und mit den langen Wartezeiten wegen CPU- und Schreibgeschwindigkeit zeitaufwändig) zu warten ist. Wenn man hier also ebenfalls einen 24/7 Rechner nimmt der Linux-fähig...

Wir haben das Thema auch öfter am Tisch und würden uns hier auch über eine manuelle Lösung freuen, denn in der Praxis ist es ja oft so, dass ein paar Stunden Ausfall verkraftbar sind und praktisch ja auch nur selten vorkommen aber es eben bis zur Lieferung/Reparatur der Hardware doch wieder zu...

Ich habe das Problem auch bei einer Neuinstallation unter Proxmox 7.1 einer DE-Version von Windows Server 2022 Standard und Virtio 0.1.215. Alle gefundenen Lösungsvorschläge mit Deinstallation der Treiber, Zurücksetzen der Netzwerkverbindung funkionieren nicht. Habe nun aufgrund dieses Beitrags...

Today I had another error at boot: error: checksum verification failed. Entering rescue mode... I tried to import the pool via Proxmox Debug-Mode but it said: cannot import 'rpool': pool was previously in use from antoher system. Last accesd by (none) (hostid=3e48ec5c) at Fri Feb 12 07_13:37...

I also had the AHCI-Mode enabled, disabled it and around that try it was when it booted once but then it occured again...

So I tried another few things including changing RAM and Updating BIOS (was not successful as have no active Support Subscription). For others may be interested my steps i tried additionaly to the zpool mount: cd / mkdir /mnt/rescue zpool import -f -R /mnt/rescue rpool for dir in sys proc dev...

May there are others searching - for me I had to edit it a little bit: cd / mkdir /mnt/rescue zpool import -f -R /mnt/rescue rpool for dir in sys proc dev; do mount --bind /$dir /mnt/rescue/$dir; done chroot /mnt/rescue zpool status exit for dir in sys proc dev; do umount /mnt/rescue/$dir; done...

I've the same problem with a HP Proliant Microserver G8 with SATA Mode enabled (AHCI on or off) in Bios. Before I configured the 4 3TB WD Red drives as seperate Raid0 devices on the integraded Fake-Raid-controller but shouldn'tmatter when the Bios is set to Sata and I don't see anything about a...

Thanks for answering, I mean if proxmox should be installed on a seperate disk instead of direct on the same zfs volume where the vms run.

Hi there, Im configuring my first HPE-Server and need your help. We would like to use the standard Controller P408i-a in RAID10 Mode or HBA-Mode(is it working correctly?) - has anybody expierence if its working fine? If not, what would be better? Second, apart from HP-specific, I'm thinking...

Hi there, I'm planning a customers infrastructure and thinking about putting there a Miniserver (or other hardware?!) there with 2 installed VMs instead of our standard NAS. I'd setup PV on host and on there 1xPBS and 1xTurnkey Fileserver. So I've the advantage of using PBS and can have a NAS...

To complete the thread: I reinstalled the system.

Was very simple, just had to add iface eno1 inet dhcp to /etc/network/interfaces and then ifup eno1. Now i could dkpg --reconfigrure -a but booting still stuck at Any idea why it can Run the premount script but doesn't find the zfs script? EDIT: retried to find the error and dpkg says it...

Thanks Stoiko, brought me forward but now stuck in bringing up network in debug mode - i need if for fix the packages, is this possible somehow?

I tried to figure out and as the Buster-Live iso doesn't know very much about zfsutils from itself including the backports. So I tried a Ubuntu 19.04 where I had the success to find my pool and can bring it online but just read-only because some requirements for read/write are missing. Would...

Hi there, as I made a config mistake my boot ends up with a kernel panic so I'd like to repair the installation (zfs-utils not running correctly so no root file system availible for booting). Thought about booting a buster-iso, chroot and try to fix it but I don't find anything about it to boot...

You made my day!! Searched the last two days whats the error. For others running in the same situation: Mine was a bit different but can now say its similar: I have automount cifs-Shares in there and the target wasn't responding correctly so it slowed down my speed at read - depending on how big...