I've had trouble tracking down the cause, but at the point in the 3.11 OpenShift installer, the task called `TASK [Initialize openshift.node.sdn_mtu]` is the last one before suddently all my Proxmox VMs shutdown.
I can't think of what this could possibly be aside from an excess of network...
I recently upgraded from 3.4 to 4.2 and I have 4 leftover openvz container entries in my server list...
Can't seem to find them on the host, and I want them gone from the server list.
Anyone have any idea how to be rid of those?
OK, really delayed reply, but I'm reviving this thread with success.
I took another look at the changes to do and the following setup is working..
/etc/network# cat interfaces # network interface settings
auto lo
iface lo inet loopback
iface eth0 inet manual
iface eth1 inet manual
iface...
Hello all,
I've a single-node home-based Proxmox machine with 3 active always-on VMs in it and I'm at the point where I'd like to transition the "local" storage volume to ZFS underneath, instead of LVM. the root and swap can exist on a single drive.
I have 3 other storage drives in the LVM at...
VMs don't automatically use both bridge interfaces (vmbr#).
In the web GUI, manually add the second network interface to the VM (while it's down) and be sure to specify which vmbr# you wish to use.
Then boot the VM and it should see the new interface.
Interested in using ZFS myself, just to get this right..
If I wanted to start using ZFS on my current single Proxmox node for all of my local storage, I would have to clear all of my storage drives and then setup ZFS and then point the Proxmox /var/lib/vz at the ZFS volume?
Or would it entail...
I imagine there's a good reason why Linus put bcache into the latest 3.10 kernels ;)
Here's another vote for soft cache support without RAID controllers.
I have noticed the first pings always have more latency. I haven't yet had a chance to examine the packets with wireshark yet, but I intend to look into it.
Is there something in the virtio abstraction of the NICs that is adding the latency?
You can do this, but you must unplug the 3tb drive before/during install so as to not allow the installer to use the drive.
When you're done with installation, connect the 3tb drive and then you will be able to add it using command line ...
see...
DHCPD would be great, but I wonder if it would conflict with one of my VMs that already acts as DHCP and DNS for my network. I'm no expert in such a thing tho.
While on the topic of suggested improvements, could we add:
- some kind of hard drive temperature reading pass-thru from the host to...
OK so I had some issues trying to get this to work. I made a few attempts with settings, while always keeping a working backup of the interfaces file.
Noteworthy:
- Using consumer-grade networking gear.
- using a dual-NIC card on my proxmox server as well as the mobo NIC
- all 3 cables from the...
Why would Proxmox show 32GB of ram on my first and second boot after install and then after yet a few more reboots I see only 16GB reported in the dashboard.
I'll post my 'cat /proc/meminfo' later today, but has anyone else experienced this?
Motherboard is an Asus M5A97 and ram is:
2x8GB Team...
I use virtio drivers for networking in the VMs.
otherwise I've 3 nics on the host...
eht0 = solo
eth 1 and eth2 = bond0
vmbr0 = eth0 + bond0
that's it.
I also find it useful to force static IPs in the VMs themselves.
--------------------------
Anyone have any idea why my host suddenly reports...
I'm just going to document my setup I recently did with Proxmox on a home server box that used to run Fedora 14 for file serving, media serving, vpn-ing, DHCP and DNS host .. all with the Amahi.org software tied in
box specs:
Asus M5a97 motherboard; AMD 1045T x6 95w 2.7Ghz CPU; 32GB ddr3...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.