Update geht nicht?

A

Alvin2k8

Member
Feb 22, 2023
47
0
6
Hallo,

ich habe gerade mehrere Server von 7 auf 8 geupdatet.
Bei einem bleibt der Kernel aber stehen?

1711637789821.png

Wenn ich apt update && apt upragde mache findet er keine Updates mehr..

Jemand ne Idee?
 

Attachments

  • 1711637777686.png
    1711637777686.png
    5.1 KB · Views: 6
hast du denn schon rebootet? waren irgendwelche fehler beim upgrade zu sehen?
 
Jap, reboot schon öfters durchgfeführt.

Nein, keine Fehler beim Upgrade!

Muss ich dann mal per ILO drauf...
Details kommen...
 
Last edited:
Alvin2k8 said:
Jap, reboot schon öfters durchgfeführt.

Nein, keine Fehler beim Upgrade!

Muss ich dann mal per ILO drauf...
Details kommen...
Click to expand...

kannst du mal folgende infos posten:
- pveversion -v
- proxmox-boot-tool status

danke!
 
Dunuin said:
Niemals ein "apt upgrade" machen. Das kann dir dein PVE zerschießen. Sicher wäre "apt dist-upgrade" oder "apt full-upgrade".
Click to expand...
Danke, werde ich künftig berückrichtigen!

Aber wie löse ich mein jetziges Problem? ;)
 
fabian said:
kannst du mal folgende infos posten:
- pveversion -v
- proxmox-boot-tool status

danke!
Click to expand...
proxmox-ve: 8.1.0 (running kernel: 5.15.143-1-pve)
pve-manager: 8.1.8 (running version: 8.1.8/d29041d9f87575d0)
proxmox-kernel-helper: 8.1.0
pve-kernel-5.15: 7.4-11
proxmox-kernel-6.5.13-3-pve-signed: 6.5.13-3
proxmox-kernel-6.5: 6.5.13-3
pve-kernel-5.15.143-1-pve: 5.15.143-1
ceph-fuse: 16.2.11+ds-2
corosync: 3.1.7-pve3
criu: 3.17.1-2
glusterfs-client: 10.3-5
ifupdown: residual config
ifupdown2: 3.2.0-1+pmx8
ksm-control-daemon: 1.4-1
libjs-extjs: 7.0.0-4
libknet1: 1.28-pve1
libproxmox-acme-perl: 1.5.0
libproxmox-backup-qemu0: 1.4.1
libproxmox-rs-perl: 0.3.3
libpve-access-control: 8.1.3
libpve-apiclient-perl: 3.3.2
libpve-cluster-api-perl: 8.0.5
libpve-cluster-perl: 8.0.5
libpve-common-perl: 8.1.1
libpve-guest-common-perl: 5.0.6
libpve-http-server-perl: 5.0.6
libpve-network-perl: 0.9.6
libpve-rs-perl: 0.8.8
libpve-storage-perl: 8.1.3
libspice-server1: 0.15.1-1
lvm2: 2.03.16-2
lxc-pve: 5.0.2-4
lxcfs: 5.0.3-pve4
novnc-pve: 1.4.0-3
proxmox-backup-client: 3.1.5-1
proxmox-backup-file-restore: 3.1.5-1
proxmox-kernel-helper: 8.1.0
proxmox-mail-forward: 0.2.3
proxmox-mini-journalreader: 1.4.0
proxmox-offline-mirror-helper: 0.6.5
proxmox-widget-toolkit: 4.1.5
pve-cluster: 8.0.5
pve-container: 5.0.9
pve-docs: 8.1.5
pve-edk2-firmware: 4.2023.08-4
pve-firewall: 5.0.3
pve-firmware: 3.9-2
pve-ha-manager: 4.0.3
pve-i18n: 3.2.1
pve-qemu-kvm: 8.1.5-4
pve-xtermjs: 5.3.0-3
qemu-server: 8.1.1
smartmontools: 7.3-pve1
spiceterm: 3.3.0
swtpm: 0.8.0+pve1
vncterm: 1.8.0
zfsutils-linux: 2.2.3-pve1


1711638805297.png
 
dann bitte noch "efibootmgr -v", "lsblk" und "mount"
 
fabian said:
dann bitte noch "efibootmgr -v", "lsblk" und "mount"
Click to expand...
ootCurrent: 000F
Timeout: 0 seconds
BootOrder: 000F,0014,0017,000E,0000,0001,0002,0003,0004,0005,0006,0007,0008,0009,000A,000B,000C,000D,0010,0011,0012,0013,0015,0016,0018,0019
Boot0000* System Utilities FvVol(cdbb7b35-6833-4ed6-9ab2-57d2acddf6f0)/FvFile(1fd631e5-44e0-2f91-10ab-f88f3568ef30)
Boot0001 Non bootable Hotkey FvVol(cdbb7b35-6833-4ed6-9ab2-57d2acddf6f0)/FvFile(4affaab0-1376-44b4-9c6e-e92388751bc6)
Boot0002 Intelligent Provisioning FvVol(cdbb7b35-6833-4ed6-9ab2-57d2acddf6f0)/FvFile(4a433501-ddaa-490b-96b2-04f42d8669b8)
Boot0003 Embedded UEFI Shell FvVol(cdbb7b35-6833-4ed6-9ab2-57d2acddf6f0)/FvFile(c57ad6b7-0515-40a8-9d21-551652854e37)
Boot0004 Embedded iPXE FvVol(cdbb7b35-6833-4ed6-9ab2-57d2acddf6f0)/FvFile(e22ad661-333a-4452-a101-64cc1898b837)
Boot0005 Diagnose Error FvVol(cdbb7b35-6833-4ed6-9ab2-57d2acddf6f0)/FvFile(0849279d-40d5-53ea-e764-2496766f9844)
Boot0006 Boot Menu FvVol(cdbb7b35-6833-4ed6-9ab2-57d2acddf6f0)/FvFile(d3fd6286-43c5-bb8d-0793-07b70aa9de36)
Boot0007 Network Boot FvVol(cdbb7b35-6833-4ed6-9ab2-57d2acddf6f0)/FvFile(0334f316-c276-49f6-9879-aaf1ecffa5d5)
Boot0008 View Integrated Management Log FvVol(cdbb7b35-6833-4ed6-9ab2-57d2acddf6f0)/FvFile(93c92423-d1c6-4286-be67-b76b6671047e)
Boot0009 View GUI mode Integrated Management Log FvVol(cdbb7b35-6833-4ed6-9ab2-57d2acddf6f0)/FvFile(f77778ab-a777-7777-9c58-60b5f0cba9d4)
Boot000A View BIOS Event Log FvVol(cdbb7b35-6833-4ed6-9ab2-57d2acddf6f0)/FvFile(c20a40f3-4f7f-b41f-f614-628093c6b567)
Boot000B HTTP Boot FvVol(cdbb7b35-6833-4ed6-9ab2-57d2acddf6f0)/FvFile(3f770860-3d63-4803-9ea3-df37144ab546)
Boot000C PXE Boot FvVol(cdbb7b35-6833-4ed6-9ab2-57d2acddf6f0)/FvFile(ee8b26b0-37e9-11e1-b86c-0800200c9a66)
Boot000D Embedded Diagnostics FvVol(cdbb7b35-6833-4ed6-9ab2-57d2acddf6f0)/FvFile(b57fe6f1-4f49-d46e-4bba-0a8add34d2f3)
Boot000E* Generic USB Boot UsbClass(ffff,ffff,255,255)
Boot000F* debian HD(1,GPT,67bf3c1f-b6e7-4e36-983f-7878e8d30f6c,0x800,0x79800)/File(\EFI\debian\shimx64.efi)
Boot0010* Storage Slot 12 : HPE Smart Array E208i-a SR Gen10 - Size:1.819 TiB Port:2I Bay:5 Box:3 PciRoot(0x0)/Pci(0x3,0x2)/Pci(0x0,0x0)/SCSI(4,16384)N.....YM....R,Y.
Boot0011* Storage Slot 12 : HPE Smart Array E208i-a SR Gen10 - Size:1.819 TiB Port:2I Bay:6 Box:3 PciRoot(0x0)/Pci(0x3,0x2)/Pci(0x0,0x0)/SCSI(5,16384)N.....YM....R,Y.
Boot0012* Storage Slot 12 : HPE Smart Array E208i-a SR Gen10 - Size:1.819 TiB Port:1I Bay:1 Box:3 PciRoot(0x0)/Pci(0x3,0x2)/Pci(0x0,0x0)/SCSI(3,16384)N.....YM....R,Y.
Boot0013* Storage Slot 12 : HPE Smart Array E208i-a SR Gen10 - Size:1.819 TiB Port:1I Bay:2 Box:3 PciRoot(0x0)/Pci(0x3,0x2)/Pci(0x0,0x0)/SCSI(2,16384)N.....YM....R,Y.
Boot0014* OCP Slot 10 Port 1 : Intel(R) Ethernet Network Adapter I350-T4 for OCP NIC 3.0 (PXE IPv4) PciRoot(0x1)/Pci(0x1,0x3)/Pci(0x0,0x0)/MAC(6805caefd562,1)/IPv4(0.0.0.00.0.0.0,0,0)N.....YM....R,Y.
Boot0015* Storage Slot 12 : HPE Smart Array E208i-a SR Gen10 - Size:1.819 TiB Port:1I Bay:3 Box:3 PciRoot(0x0)/Pci(0x3,0x2)/Pci(0x0,0x0)/SCSI(1,16384)N.....YM....R,Y.
Boot0016* Storage Slot 12 : HPE Smart Array E208i-a SR Gen10 - Size:1.819 TiB Port:1I Bay:4 Box:3 PciRoot(0x0)/Pci(0x3,0x2)/Pci(0x0,0x0)/SCSI(0,16384)N.....YM....R,Y.
Boot0017* debian1 HD(1,GPT,52277497-767f-4f5d-a68d-dc4ee39edae5,0x800,0xff800)/File(\EFI\debian1\grubx64.efi)
Boot0018* Storage Slot 12 : HPE Smart Array E208i-a SR Gen10 - Size:1.819 TiB Port:2I Bay:7 Box:3 PciRoot(0x0)/Pci(0x3,0x2)/Pci(0x0,0x0)/SCSI(6,16384)N.....YM....R,Y.
Boot0019* Storage Slot 12 : HPE Smart Array E208i-a SR Gen10 - Size:1.819 TiB Port:2I Bay:8 Box:3 PciRoot(0x0)/Pci(0x3,0x2)/Pci(0x0,0x0)/SCSI(7,16384)N.....YM....R,Y.

NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS
sda 8:0 0 1.8T 0 disk
├─sda1 8:1 0 243M 0 part /boot/efi
├─sda2 8:2 0 9.3G 0 part
├─sda3 8:3 0 9.1G 0 part
└─sda4 8:4 0 1.8T 0 part
sdb 8:16 0 1.8T 0 disk
├─sdb1 8:17 0 243M 0 part
├─sdb2 8:18 0 9.3G 0 part
│ └─md0 9:0 0 9.3G 0 raid1 /
├─sdb3 8:19 0 9.1G 0 part
└─sdb4 8:20 0 1.8T 0 part
sdc 8:32 0 1.8T 0 disk
├─sdc1 8:33 0 18.6G 0 part
└─sdc2 8:34 0 1.8T 0 part
sdd 8:48 0 1.8T 0 disk
├─sdd1 8:49 0 18.6G 0 part
└─sdd2 8:50 0 1.8T 0 part
sde 8:64 0 1.8T 0 disk
├─sde1 8:65 0 18.6G 0 part
└─sde2 8:66 0 1.8T 0 part
sdf 8:80 0 1.8T 0 disk
├─sdf1 8:81 0 18.6G 0 part
└─sdf2 8:82 0 1.8T 0 part
sdg 8:96 0 1.8T 0 disk
├─sdg1 8:97 0 18.6G 0 part
└─sdg2 8:98 0 1.8T 0 part
sdh 8:112 0 1.8T 0 disk
├─sdh1 8:113 0 18.6G 0 part
└─sdh2 8:114 0 1.8T 0 part
zd0 230:0 0 128G 0 disk [SWAP]

sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=131887764k,nr_inodes=32971941,mode=755,inode64)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,nodev,noexec,relatime,size=26383528k,mode=755,inode64)
/dev/md0 on / type ext4 (rw,relatime,errors=remount-ro)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev,inode64)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k,inode64)
cgroup2 on /sys/fs/cgroup type cgroup2 (rw,nosuid,nodev,noexec,relatime)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
efivarfs on /sys/firmware/efi/efivars type efivarfs (rw,nosuid,nodev,noexec,relatime)
bpf on /sys/fs/bpf type bpf (rw,nosuid,nodev,noexec,relatime,mode=700)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=30,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=63860)
mqueue on /dev/mqueue type mqueue (rw,nosuid,nodev,noexec,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
debugfs on /sys/kernel/debug type debugfs (rw,nosuid,nodev,noexec,relatime)
tracefs on /sys/kernel/tracing type tracefs (rw,nosuid,nodev,noexec,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,nosuid,nodev,noexec,relatime)
configfs on /sys/kernel/config type configfs (rw,nosuid,nodev,noexec,relatime)
none on /run/credentials/systemd-sysusers.service type ramfs (ro,nosuid,nodev,noexec,relatime,mode=700)
none on /run/credentials/systemd-tmpfiles-setup-dev.service type ramfs (ro,nosuid,nodev,noexec,relatime,mode=700)
none on /run/credentials/systemd-sysctl.service type ramfs (ro,nosuid,nodev,noexec,relatime,mode=700)
/dev/sda1 on /boot/efi type vfat (rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
datastore on /datastore type zfs (rw,relatime,xattr,noacl)
none on /run/credentials/systemd-tmpfiles-setup.service type ramfs (ro,nosuid,nodev,noexec,relatime,mode=700)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,nosuid,nodev,noexec,relatime)
sunrpc on /run/rpc_pipefs type rpc_pipefs (rw,relatime)
lxcfs on /var/lib/lxcfs type fuse.lxcfs (rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other)
/dev/fuse on /etc/pve type fuse (rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other)
tmpfs on /run/user/0 type tmpfs (rw,nosuid,nodev,relatime,size=26383528k,nr_inodes=6595882,mode=700,inode64)
 
"Boot000F* debian HD(1,GPT,67bf3c1f-b6e7-4e36-983f-7878e8d30f6c,0x800,0x79800)/File(\EFI\debian\shimx64.efi)"

das klingt falsch ;) vermutlich bootest du von einem falschen bootloader.. wie wurde das system denn urspruenglich installiert?
 
okay. also ich vermute der booteintrag via shim->grub verwendet nicht die grub config die vom system generiert wird, sondern verweist auf den alten kernel. wahrscheinlich laesst sich das durch installieren der richtigen grub pakete gefolgt von "grub-install" mit den richtigen parametern beheben. ist das system mit secureboot aufgesetzt?
 
fabian said:
okay. also ich vermute der booteintrag via shim->grub verwendet nicht die grub config die vom system generiert wird, sondern verweist auf den alten kernel. wahrscheinlich laesst sich das durch installieren der richtigen grub pakete gefolgt von "grub-install" mit den richtigen parametern beheben. ist das system mit secureboot aufgesetzt?
Click to expand...
Was kann ich deiner Meinung nach noch tun?
 
was sagt denn "dmesg | grep -i secure"?
 
[ 0.000000] secureboot: Secure boot disabled
[ 0.012251] secureboot: Secure boot disabled
[ 2.186601] integrity: Loaded X.509 cert 'Hewlett Packard Enterprise Company: HPE UEFI Secure Boot 2016 DB Key: a068bfe686eec826df935e3bb1cd36f1c2772560'
[ 2.186617] integrity: Loaded X.509 cert 'Hewlett-Packard Company: HP UEFI Secure Boot 2013 DB key: 1d7cf2c2b92673f69c8ee1ec7063967ab9b62bec'
[ 2.186921] integrity: Loaded X.509 cert 'VMware, Inc.: VMware Secure Boot Signing: 04597f3e1ffb240bba0ff0f05d5eb05f3e15f6d7'
[ 2.187992] integrity: Loaded X.509 cert 'Proxmox Server Solutions GmbH: Secure Boot CA: b5f1b11e482db5869329cb975aa35205f872cd7a
 
okay.

hat dein hoster die zugang zu iKVM oder aehnlichem gegeben, damit du falls notwendig manuell eingreifen kannst?

dann wuerde ich folgendes vorschlagen:

"apt install grub-efi-amd64-bin"

"grub-install --target x86_64-efi --no-floppy --bootloader-id='proxmox' /dev/sda"
"update-grub"

nun solltest du in deiner UEFI firmware einen boot eintrag namens "proxmox" finden, der deine aktuellen kernels booten kann. falls das nicht klappt, bitte den output der befehle posten!
 
hast du den proxmox eintrag ausgewaehlt beim booten? -> bitte den output von "update-grub", "efibootmgr -v" und "find /boot/efi" posten :)
 
Update Grub:
Generating grub configuration file ...
/usr/sbin/grub-probe: warning: Couldn't find physical volume `(null)'. Some modules may be missing from core image..
/usr/sbin/grub-probe: warning: Couldn't find physical volume `(null)'. Some modules may be missing from core image..
/usr/sbin/grub-probe: warning: Couldn't find physical volume `(null)'. Some modules may be missing from core image..
/usr/sbin/grub-probe: warning: Couldn't find physical volume `(null)'. Some modules may be missing from core image..
Found linux image: /boot/vmlinuz-6.5.13-3-pve
Found initrd image: /boot/initrd.img-6.5.13-3-pve
/usr/sbin/grub-probe: warning: Couldn't find physical volume `(null)'. Some modules may be missing from core image..
/usr/sbin/grub-probe: warning: Couldn't find physical volume `(null)'. Some modules may be missing from core image..
/usr/sbin/grub-probe: warning: Couldn't find physical volume `(null)'. Some modules may be missing from core image..
Found linux image: /boot/vmlinuz-6.2.16-20-pve
Found initrd image: /boot/initrd.img-6.2.16-20-pve
Found linux image: /boot/vmlinuz-5.15.143-1-pve
Found initrd image: /boot/initrd.img-5.15.143-1-pve
/usr/sbin/grub-probe: warning: Couldn't find physical volume `(null)'. Some modules may be missing from core image..
Adding boot menu entry for UEFI Firmware Settings ...
done


efibootmgr
BootCurrent: 001A
Timeout: 0 seconds
BootOrder: 001A,000F,0014,0017,000E,0000,0001,0002,0003,0004,0005,0006,0007,0008,0009,000A,000B,000C,000D,0010,0011,0012,0013,0015,0016,0018,0019
Boot0000* System Utilities FvVol(cdbb7b35-6833-4ed6-9ab2-57d2acddf6f0)/FvFile(1fd631e5-44e0-2f91-10ab-f88f3568ef30)
Boot0001 Non bootable Hotkey FvVol(cdbb7b35-6833-4ed6-9ab2-57d2acddf6f0)/FvFile(4affaab0-1376-44b4-9c6e-e92388751bc6)
Boot0002 Intelligent Provisioning FvVol(cdbb7b35-6833-4ed6-9ab2-57d2acddf6f0)/FvFile(4a433501-ddaa-490b-96b2-04f42d8669b8)
Boot0003 Embedded UEFI Shell FvVol(cdbb7b35-6833-4ed6-9ab2-57d2acddf6f0)/FvFile(c57ad6b7-0515-40a8-9d21-551652854e37)
Boot0004 Embedded iPXE FvVol(cdbb7b35-6833-4ed6-9ab2-57d2acddf6f0)/FvFile(e22ad661-333a-4452-a101-64cc1898b837)
Boot0005 Diagnose Error FvVol(cdbb7b35-6833-4ed6-9ab2-57d2acddf6f0)/FvFile(0849279d-40d5-53ea-e764-2496766f9844)
Boot0006 Boot Menu FvVol(cdbb7b35-6833-4ed6-9ab2-57d2acddf6f0)/FvFile(d3fd6286-43c5-bb8d-0793-07b70aa9de36)
Boot0007 Network Boot FvVol(cdbb7b35-6833-4ed6-9ab2-57d2acddf6f0)/FvFile(0334f316-c276-49f6-9879-aaf1ecffa5d5)
Boot0008 View Integrated Management Log FvVol(cdbb7b35-6833-4ed6-9ab2-57d2acddf6f0)/FvFile(93c92423-d1c6-4286-be67-b76b6671047e)
Boot0009 View GUI mode Integrated Management Log FvVol(cdbb7b35-6833-4ed6-9ab2-57d2acddf6f0)/FvFile(f77778ab-a777-7777-9c58-60b5f0cba9d4)
Boot000A View BIOS Event Log FvVol(cdbb7b35-6833-4ed6-9ab2-57d2acddf6f0)/FvFile(c20a40f3-4f7f-b41f-f614-628093c6b567)
Boot000B HTTP Boot FvVol(cdbb7b35-6833-4ed6-9ab2-57d2acddf6f0)/FvFile(3f770860-3d63-4803-9ea3-df37144ab546)
Boot000C PXE Boot FvVol(cdbb7b35-6833-4ed6-9ab2-57d2acddf6f0)/FvFile(ee8b26b0-37e9-11e1-b86c-0800200c9a66)
Boot000D Embedded Diagnostics FvVol(cdbb7b35-6833-4ed6-9ab2-57d2acddf6f0)/FvFile(b57fe6f1-4f49-d46e-4bba-0a8add34d2f3)
Boot000E* Generic USB Boot UsbClass(ffff,ffff,255,255)
Boot000F* debian HD(1,GPT,67bf3c1f-b6e7-4e36-983f-7878e8d30f6c,0x800,0x79800)/File(\EFI\debian\shimx64.efi)
Boot0010* Storage Slot 12 : HPE Smart Array E208i-a SR Gen10 - Size:1.819 TiB Port:2I Bay:5 Box:3 PciRoot(0x0)/Pci(0x3,0x2)/Pci(0x0,0x0)/SCSI(4,16384)N.....YM....R,Y.
Boot0011* Storage Slot 12 : HPE Smart Array E208i-a SR Gen10 - Size:1.819 TiB Port:2I Bay:6 Box:3 PciRoot(0x0)/Pci(0x3,0x2)/Pci(0x0,0x0)/SCSI(5,16384)N.....YM....R,Y.
Boot0012* Storage Slot 12 : HPE Smart Array E208i-a SR Gen10 - Size:1.819 TiB Port:1I Bay:1 Box:3 PciRoot(0x0)/Pci(0x3,0x2)/Pci(0x0,0x0)/SCSI(3,16384)N.....YM....R,Y.
Boot0013* Storage Slot 12 : HPE Smart Array E208i-a SR Gen10 - Size:1.819 TiB Port:1I Bay:2 Box:3 PciRoot(0x0)/Pci(0x3,0x2)/Pci(0x0,0x0)/SCSI(2,16384)N.....YM....R,Y.
Boot0014* OCP Slot 10 Port 1 : Intel(R) Ethernet Network Adapter I350-T4 for OCP NIC 3.0 (PXE IPv4) PciRoot(0x1)/Pci(0x1,0x3)/Pci(0x0,0x0)/MAC(6805caefd562,1)/IPv4(0.0.0.00.0.0.0,0,0)N.....YM....R,Y.
Boot0015* Storage Slot 12 : HPE Smart Array E208i-a SR Gen10 - Size:1.819 TiB Port:1I Bay:3 Box:3 PciRoot(0x0)/Pci(0x3,0x2)/Pci(0x0,0x0)/SCSI(1,16384)N.....YM....R,Y.
Boot0016* Storage Slot 12 : HPE Smart Array E208i-a SR Gen10 - Size:1.819 TiB Port:1I Bay:4 Box:3 PciRoot(0x0)/Pci(0x3,0x2)/Pci(0x0,0x0)/SCSI(0,16384)N.....YM....R,Y.
Boot0017* debian1 HD(1,GPT,52277497-767f-4f5d-a68d-dc4ee39edae5,0x800,0xff800)/File(\EFI\debian1\grubx64.efi)
Boot0018* Storage Slot 12 : HPE Smart Array E208i-a SR Gen10 - Size:1.819 TiB Port:2I Bay:7 Box:3 PciRoot(0x0)/Pci(0x3,0x2)/Pci(0x0,0x0)/SCSI(6,16384)N.....YM....R,Y.
Boot0019* Storage Slot 12 : HPE Smart Array E208i-a SR Gen10 - Size:1.819 TiB Port:2I Bay:8 Box:3 PciRoot(0x0)/Pci(0x3,0x2)/Pci(0x0,0x0)/SCSI(7,16384)N.....YM....R,Y.
Boot001A* proxmox HD(1,GPT,67bf3c1f-b6e7-4e36-983f-7878e8d30f6c,0x800,0x79800)/File(\EFI\proxmox\shimx64.efi)


find:

/boot/efi
/boot/efi/EFI
/boot/efi/EFI/debian
/boot/efi/EFI/debian/shimx64.efi
/boot/efi/EFI/debian/grubx64.efi
/boot/efi/EFI/debian/mmx64.efi
/boot/efi/EFI/debian/fbx64.efi
/boot/efi/EFI/debian/BOOTX64.CSV
/boot/efi/EFI/debian/grub.cfg
/boot/efi/EFI/BOOT
/boot/efi/EFI/BOOT/BOOTX64.EFI
/boot/efi/EFI/BOOT/grubx64.efi
/boot/efi/EFI/BOOT/fbx64.efi
/boot/efi/EFI/proxmox
/boot/efi/EFI/proxmox/shimx64.efi
/boot/efi/EFI/proxmox/grubx64.efi
/boot/efi/EFI/proxmox/mmx64.efi
/boot/efi/EFI/proxmox/fbx64.efi
/boot/efi/EFI/proxmox/BOOTX64.CSV
/boot/efi/EFI/proxmox/grub.cfg
 
You must log in or register to reply here.

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Quick Navigation

Home Get Subscription Wiki Downloads Proxmox Customer Portal About

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!
Community platform by XenForo® © 2010-2024 XenForo Ltd.
Top Bottom
Back