Recent content by SlothCroissant

  1. S

    Host cannot ping Guest when in same VLAN (but only *one* VLAN) via ovs

    Problem Statement PVE Host cannot ping or communicate to VM on same host, only when that VM is in a specific vlan (that is shared with the host). Issue persists across hosts, but always only the one specific vlan has issues - guests in another vlan (also with a vlanX interface on the host) work...
  2. S

    Error preparing initrd: Bad Buffer Size

    Can confirm, issue persists on an R620, and chroot-ing to do an update from the pvetest repos doesn't solve :( Here's a high-level of what I did: Run installer via debug, Installer drops into shell after installation completes and you click "reboot" zpool import rpool chroot / ifconfig eno3...
  3. S

    pvecm qdevice Issues - Peer does not recognize and trust the CA that issued your certificate.

    Nudging this, the issue still persists. I've reinstalled `corosync-qnetd`, i've deleted and re-added the qdevice in `pvecm`, etc. I cannot get the thing to like the cert (apparently).
  4. S

    pvecm qdevice Issues - Peer does not recognize and trust the CA that issued your certificate.

    Hey all, I just recently reconfigured my qdevice (I'm running a two-node setup with an external qdevice, per https://pve.proxmox.com/wiki/Cluster_Manager#_corosync_external_vote_support). root@ff-pve02:~# pveversion -v proxmox-ve: 7.4-1 (running kernel: 5.15.107-2-pve) pve-manager: 7.4-4...
  5. S

    Moving CT volume hangs

    When migrating a CT storage volume from local to local-zfs (Stop the CT, "Move Storage" in the UI), the process just hangs and never completes (30+ minutes hung right now). This happens with *all* my CTs (waiting on 5 hung move operations as we speak) Here is the status of the move job: Number...
  6. S

    Failed to add the EFI boot entry on Guest

    Hey folks, Trying to install some debian UEFI guests (Ubuntu 22.04 & Debian 11.5 with the same results), and I'm having issues with the installer failing at EFI install step: VM Info: ``` root@pve02:~# cat /etc/pve/qemu-server/101.conf acpi: 0 agent: 1 bios: ovmf boot: order=ide2;net0...
  7. S

    <50% & Quorum?

    Hey all, I have a cluster of 7 SFF PCs running as a PVE HA cluster backed by NFS storage (on an 8th machine, also in the cluster). I'm on "time-of-use" electricity costs, and would love to be able to kill off many of the SFF nodes during "peak" hours to save on energy costs, or if compute power...
  8. S

    VM sending out on two VLANs - one of which isn't assigned to VM

    Okay, i'll nudge this one more time before flat out giving up on VLANs in Proxmox :( If nothing else, can someone tell me if they see any issues with my networking configuration? ``` root@pve01:~# cat /etc/network/interfaces auto lo iface lo inet loopback auto bond0 iface bond0 inet manual...
  9. S

    VM sending out on two VLANs - one of which isn't assigned to VM

    Nudging this yet again - Can anyone provide insight into the behavior I'm seeing?
  10. S

    VM sending out on two VLANs - one of which isn't assigned to VM

    Nudging this, as I haven't been able to use my secondary ISP router for several days now due to bad VLAN tagging behavior. Can anyone provide any insight into my configuration or ideas on what may be causing my woes?
  11. S

    VM sending out on two VLANs - one of which isn't assigned to VM

    I'm seeing a very weird behavior on one of my VMs where packets appear to be duplicated on the PVE host and sent out on multiple VLANs. Expected traffic flow: VM (VLAN102 in PVE) > PVE Host Bridge (Vlan-aware) > Cisco switch (on VLAN102) Observed traffic flow: DHCP broadcasts from the VM are...
  12. S

    Opt-in Linux Kernel 5.15 for Proxmox VE 7.x available

    Hey there! Testing 5.15, on my Lenovo System X 3850x6 (4x E7-8860v3, 512GB RAM). Fresh install of 7.1 to a pair of RAID 1 ZFS SSDs, switched to the free repos, then installed `pve-kernel-5.15` (which results in pve-kernel-5.15.19-1-pve), then rebooted. Hangs immediately at: "EFI stub: loaded...
  13. S

    [SOLVED] Migration from Unraid KVM: VM in Boot Loop

    Sorry, should have clarified - No Bootable Device. The Proxmox BIOS attempts from HDD > CDROM > etc then PXE boots which doesn't find anything, then repeats. I can snag a screenshot from the console if you'd like. VM is OVMF in Unraid. I haven't tried booting from a liveCD to validate...
  14. S

    [SOLVED] Migration from Unraid KVM: VM in Boot Loop

    Hi all, Planning to migrate from Unraid's KVM over to Proxmox (plus MergerFS & SnapRAID and Docker, etc). During VM testing, I've found that I cannot boot a VM that I migrated over. I've searched the forum and all I've found is one thread that said this should just work, but I can't for the...

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!