Hello forum,
we have one proxmox cluster installed and functionally OK at version 3.3-1 as per following pveversion -v
root@c00:~# pveversion -v
proxmox-ve-2.6.32: 3.2-136 (running kernel: 2.6.32-32-pve)
pve-manager: 3.3-1 (running version: 3.3-1/a06c9f73)
pve-kernel-2.6.32-32-pve: 2.6.32-136...
Hello forum,
we are using 10Gb NICs from Allied Telesis model AT-VNC10S based on Broadcom BCM57711 chipset (bnx2x kernel module).
We are experiencing in these days an abnormal growth of kern.log with the following sequence repeated more or less the same every cicle:
Oct 27 08:38:55 c00 kernel...
Infact we found some glitches in c04 and tried to fix them yesterday evening:
root@c04:/var/log/ceph# zcat ceph-osd.9.log.1.gz | tail -30
2014-09-30 16:28:09.165872 7ff0dbf05700 -1 osd.9 8775 heartbeat_check: no reply from osd.3 since back 2014-09-30 16:27:13.896151 front 2014-09-30...
Hello forum,
we are running a subscripted 5-nodes proxmox and ceph cluster for a while, in last hours our mon log includes entries like the following ones:
2014-09-30 16:24:20.599818 mon.0 10.10.0.75:6789/0 2198 : [INF] pgmap v5025678: 640 pgs: 640 active+clean; 1401 GB data, 4209 GB used...
OK port 6789 added. Now the 500 error doesn't show in GUI but when I try to create a VM and create storage on rbd pool, I obtain "TASK ERROR: create failed - rbd error: rbd: couldn't connect to the cluster!" and the VM creation aborts.
Pasquale
Hello forum,
one more question... installed ceph using pveceph tools. My cluster has very unbalanced osds and only one monitor but I built it up only for testing purpose.
All osds up/in, has HEALTH_WARN condition (maybe due to osd/capacity unbalancing between nodes) and...
Re: [SOLVED] Re: No more GUI after clusterization, cpg_dispatch failed but quorum OK
Done.
root@c10:~# pveversion -v
proxmox-ve-2.6.32: 3.2-136 (running kernel: 2.6.32-32-pve)
pve-manager: 3.2-30 (running version: 3.2-30/1d095287)
pve-kernel-2.6.32-32-pve: 2.6.32-136
pve-kernel-2.6.32-29-pve...
Re: [SOLVED] Re: No more GUI after clusterization, cpg_dispatch failed but quorum OK
ok !
root@c10:~# pveversion -v
proxmox-ve-2.6.32: 3.2-136 (running kernel: 2.6.32-29-pve)
pve-manager: 3.2-30 (running version: 3.2-30/1d095287)
pve-kernel-2.6.32-32-pve: 2.6.32-136
pve-kernel-2.6.32-29-pve...
[SOLVED] Re: No more GUI after clusterization, cpg_dispatch failed but quorum OK
Infact...
root@c10:~# pveversion -v proxmox-ve-2.6.32: not correctly installed (running kernel: 2.6.32-29-pve) pve-manager: 3.2-30 (running version: 3.2-30/1d095287) pve-kernel-2.6.32-29-pve: 2.6.32-126 lvm2...
[SOLVED] Re: No more GUI after clusterization, cpg_dispatch failed but quorum OK
Gotcha! :D
My fail... the cluster and GUI are now fully functional !
root@c10:~# pveversion -v
proxmox-ve-2.6.32: not correctly installed (running kernel: 2.6.32-29-pve)
pve-manager: 3.2-30 (running version...
I modified /etc/apt/sources.list and /etc/apt/sources.list as suggested on wiki and some issues have been resolved. pve-manager has been successfully installed but pve-version is not. GUI isn't yet functional.
root@c10:~# apt-get update
Get:1 http://download.proxmox.com wheezy Release.gpg [198...
Hi Dietmar,
As I previously stated , no pveversion command is installed and if I try to install pve-manager package an error arise.
Infact:
root@c10:~# pveversion -v
-bash: pveversion: command not found
root@c10:~# pve-manager
-bash: pve-manager: command not found
root@c10:~# apt-get update...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.