Recent content by mastens

Hi, This is from a new installed Debian Stretch fully upgraded qemu guest. The card is working with sr-iov here... But, not on freebsd based vm. So, i'm guessing there is some type of driver compability issue on freebsd... :(

It says nothing about Proxmox 4.15.x in my post. I was hoping for a staff reply, To confirm it's an bug, and not some new configuration options i've overlooked! :)

Hi, Gave the upgrade to Proxmox 6.0 Beta 1 a try on my home lab. Been using 1 VM (Qemu) for pFsense and 1 VM (Qemu) for Freenas. Been using SR-IOV on Intel Corporation I350 NIC. This has been working flawless on Proxmox 5.X. After the upgrade i'm having trouble starting both vm's. Look at...

I'm 99% sure, the module is bugged, any output in /var/log/syslog ? Do an apt-get remove pve-headers-2.6.32-12-pve Then: apt-get install pve-headers-2.6.32-12-pve Marius

100% sure you have pve-headers-2.6.32-12-pve installed? /lib/modules/2.6.32-12-pve/build is normaly linked to /usr/src/linux-headers-2.6.32-12-pve

Well, maybe it helps trying again, and copy-past the results here?

Hi, I experienced same problem with using the r8169 module, with the same NIC... Download drivers from Realtek.com.tw http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=13&PFid=5&Level=5&Conn=4&DownTypeID=3&GetDown=false LINUX driver for kernel 3.x and 2.6.x and 2.4.x...

Hi, This is pretty new, but are Proxmox 2.0 going to support Ploop? More information on http://openvz.livejournal.com/40830.html and http://wiki.openvz.org/Ploop/Getting_started Marius

Well, feel kinda stupid now! Always be sure to run the latest firmware... They actually released an new firmware now in february.... :P # pveperf CPU BOGOMIPS: 54584.04 REGEX/SECOND: 1644943 HD SIZE: 5526.60 GB (/dev/mapper/pve-root) BUFFERED READS: 299.89 MB/sec AVERAGE...

Hi, Well, no load or strain on the filesystem when this is running. and the write-cache is 100% running. even without BBU. Marius # pveperf CPU BOGOMIPS: 54584.41 REGEX/SECOND: 1668438 HD SIZE: 5526.60 GB (/dev/mapper/pve-root) BUFFERED READS: 309.66 MB/sec AVERAGE...

Hi, Seem to have low Fsync/seconds on my server. Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz 16gb DDR3 ram. Using 2x3tb Sata-2 Hdd's. Anyone with suggestions? Marius # pveperf CPU BOGOMIPS: 54584.41 REGEX/SECOND: 1725088 HD SIZE: 5526.60 GB (/dev/mapper/pve-root) BUFFERED...

vzmigrate works "well" you need to manualy edit config files for the CT after migrating them over.

Hi, You can download it directly from the web address you provided. Download it to /var/lib/vz/template/cache as long as you have the standard location. Regards Marius

Hi, 15. 213.239.229.137 0.0% 1000 44.2 44.4 40.4 83.2 3.2 16. 85.10.xxx.xxx 2.4% 1000 49.0 48.8 45.3 94.8 3.7 This is to the host machine from another location... No loss before last hop... same goes from 3 other places. So, it has to be...

darude... Question for you... Have you been running into packet loss problems after using this config? I'm having trouble, they changed nic and patch cable, switch port, and still having problems with some minor packet loss.. Which is VERY annoying... And very hard to figure out.. using the...