E
eth0
Guest
I am lost - looked @ the WIKI - but still am lost.
What I have is a system that has 1 NIC.
I want to be able to setup PVE so that vps can use a few ip ranges
12.69.12.10
and 10.10.253.145
How Do I do this with just 1 NIC ?
To be clear - normally I would go to /etc/network/interfaces and do something like this
iface eth0 inet static
address 12.69.12.145
netmask 255.255.255.128
gateway 12.69.12.129
iface eth0:0 inet static
address 10.10.253.20
netmask 255.255.255.0
gateway 12.69.12.1
the vmbr0 stuff and such has me completely lost however
I have reviewed: http://pve.proxmox.com/wiki/Network_Model#Default_Configuration_.28bridged.29
but for some reason I cannot bind more than 1 ip to a bridged ethernet device
like choosing vmbr1 to eth0 with a different ip
What I have is a system that has 1 NIC.
I want to be able to setup PVE so that vps can use a few ip ranges
12.69.12.10
and 10.10.253.145
How Do I do this with just 1 NIC ?
To be clear - normally I would go to /etc/network/interfaces and do something like this
iface eth0 inet static
address 12.69.12.145
netmask 255.255.255.128
gateway 12.69.12.129
iface eth0:0 inet static
address 10.10.253.20
netmask 255.255.255.0
gateway 12.69.12.1
the vmbr0 stuff and such has me completely lost however
I have reviewed: http://pve.proxmox.com/wiki/Network_Model#Default_Configuration_.28bridged.29
but for some reason I cannot bind more than 1 ip to a bridged ethernet device
like choosing vmbr1 to eth0 with a different ip
Last edited by a moderator: