Hi, previously I've used controller:
RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 1078 (rev 04)
with proxmox kernel 2.6.24 and worked fine.
Now I've a server with:
01:00.0 RAID bus controller: LSI Logic / Symbios Logic LSI MegaSAS 9260 (rev 04)
Subsystem: Fujitsu Technology Solutions Device 1176
...
Kernel driver in use: megaraid_sas
Kernel modules: megaraid_sas
that works only with "old" 2.6.18 (but too old for good kvm support) or "new" 2.6.32 (but no OpenVZ support... yet), while is unable to find pve devices at the middle of the boot.
I've also installed latest 2.6.24 from pvetest repository but with no luck.
Any hope to have if fixed for 2.6.24 soon?
Thanks a lot for the attention
RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 1078 (rev 04)
with proxmox kernel 2.6.24 and worked fine.
Now I've a server with:
01:00.0 RAID bus controller: LSI Logic / Symbios Logic LSI MegaSAS 9260 (rev 04)
Subsystem: Fujitsu Technology Solutions Device 1176
...
Kernel driver in use: megaraid_sas
Kernel modules: megaraid_sas
that works only with "old" 2.6.18 (but too old for good kvm support) or "new" 2.6.32 (but no OpenVZ support... yet), while is unable to find pve devices at the middle of the boot.
I've also installed latest 2.6.24 from pvetest repository but with no luck.
Any hope to have if fixed for 2.6.24 soon?
Thanks a lot for the attention
